Valve Lockout

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue.
• Resistant to low and high temperature variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Extension - 88 mm x 127 mm.
• Ball valve lockout device designed to lock pipes 0.374 up to 1.24" in outer diameter
• Color - Standard color Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue.
• Resistant to low and high temperature variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Extension - 88 mm x 127 mm.
• Ball valve lockout device designed to lock pipes 0.374 up to 1.24" in outer diameter
• Color - Standard color Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue.
• Resistant to low and high temperature variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Extension - 88 mm x 127 mm.
• Ball valve lockout device designed to lock pipes 0.374 up to 1.24" in outer diameter
• Color - Standard color Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue.
• Resistant to low and high temperature variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION  label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Ball valve lockout device designed to lock pipes 0.5" up to 2.5" in outer diameter
• Color - Standard color Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue.
• Resistant to low and high temperature variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION  label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Ball valve lockout device designed to lock pipes 0.5" up to 2.5" in outer diameter
• Color - Standard color Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM UVLD is designed to lockout almost all type of valves for variable sizes and handle dimensions (Round/Flat/square plain) &  different lengths. Valves can also be locked in
• any position for non lock-out uses.
• Material Parts - ABS / PP + Metal Steel parts
• Length of Metal steel rod - 160 mm.
• Thickness of Metal steel rod - 7.5 to 8 mm.
• Horizontal - 155 mm.
• Color - Red or any color as per quantity.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Butterfly valve lockout is used to lock hydraulic, pneumatic and chemical energies efficiently.
• Made of dielectric material and doesn’t effected by any chemical, low in cost with high performance.
• Material – Poly Propylene
• KRM LOTO ADJUSTABLE – Universal Butterfly Valve Lockout is used to block the valve lever with trigger.
• Body of lockout is divided in two parts, the butterfly valve lockout is a simple, effective way to secure your butterfly valves to prevent unauthorized operation working with low and High temperature variation – 45°C to 200°C.
• Recommended to use with cable Lockout device for stronger strength and lesser possibilities for accidents.
• Size Applicable – Suitable for 8 mm to 45 mm valves
• Color – Red Or any color make as per the required quantity
• Can be used with the combination of cable lockout as shown in image
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalog. Resistant to low and high temperature variation 45 degree Celsius to 200 degree Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene
• Dimension – Total Length of open/close position 180/114mm
• Hole Dia – 8.5mm
• Total 7 holes and maximum 2 hole for lockout
• Its specialty is that its very flexible lockout arrangement that fits on  valves of different dimensions, also very compact and easy carrying.
• Color - Red or any color make as per volume.
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Plug Valve Lockout is the main lockout device used to effortlessly and successfully secure a physically activated attachment valve with a stem width between 23 mm – 35 mm.
• The base of the lockout device can be set up once connected, and by and large does not meddle with valve actuation by torque or removable handle.
• Material - Poly Propylene
• Can be used at temperature at 31°C - 93°C.
• Adequately reasonable for the valves which are hard to lockout.
• Available in different sizes

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Plug Valve Lockout is the main lockout device used to effortlessly and successfully secure a physically activated attachment valve with a stem width between 23 mm – 35 mm.
• The base of the lockout device can be set up once connected, and by and large does not meddle with valve actuation by torque or removable handle.
• Material - Poly Propylene
• Can be used at temperature at 31°C - 93°C.
• Adequately reasonable for the valves which are hard to lockout.
• Available in different size
• Color - Red or any color make as per volume.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Plug Valve Lockout is the main lockout device used to effortlessly and successfully secure a physically activated attachment valve with a stem width between 23 mm – 35 mm.
• The base of the lockout device can be set up once connected, and by and large does not meddle with valve actuation by torque or removable handle.
• Material - Poly Propylene
• Can be used at temperature at 31°C - 93°C.
• Adequately reasonable for the valves which are hard to lockout.
• Available in different sizes
• Color - Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Plug Valve Lockout is the main lockout device used to effortlessly and successfully secure a physically activated attachment valve with a stem width between 23 mm – 35 mm.
• The base of the lockout device can be set up once connected, and by and large does not meddle with valve actuation by torque or removable handle.
• Material - Poly Propylene
• Can be used at temperature at 31°C - 93°C.
• Adequately reasonable for the valves which are hard to lockout.
• Available in different sizes.
• Color - Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Plug Valve Lockout is the main lockout device used to effortlessly and successfully secure a physically activated attachment valve with a stem width between 23 mm – 35 mm. 
• The base of the lockout device can be set up once connected, and by and large does not meddle with valve actuation by torque or removable handle. 
• Material - Poly Propylene
• Can be used at temperature at 31°C - 93°C.
• Adequately reasonable for the valves which are hard to lockout.
• Available in different sizes
• Color - Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue. Resistant to low and high temperature variation 45 degree celsius to 200 degree celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Color - Standard color Red or any color make as per volume

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue.
• Resistant to low and high temperature variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION  label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Ball valve lockout device designed to lock pipes 0.5" up to 2.5" in outer diameter
• Color - Standard color Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com