Search results for: 'handle lockout'

• Material - Made from ABS  and mild steel plate.
• Size of  Yellow part : 53x51 mm  with provision of hole.
• Size of Metal part : 88 mm x (40 + 35 at end of part) mm , but  cantilever part  from yellow base : 40mm x 40 + 35  at end of part ) mm
• Yellow Base Part can be fixed by  double sided tape or screw.
• Different shape lockouts can be customized on quantity basis.
• Put over low voltage drawer, electrical panel door or over electric handle hole for  lockout device as shown in image to prevent accident.
• Always use Lockout Tagout while shutdown and maintenance work.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com,krm@krmcorporation.com

• Material – Strong Polycarbonate body
• Multipurpose  Electrical Panel Lockout is used for air Circuit Breaker or push button which is made by two section . To install the device primarily is switched off from the Source then fix and lock it by the help of safety padlocks.
• Available with or without metallic chain of 100 mm Length to Provide better locking
• For locking arrangement one hole of 9 mm is provide.
• Lower part outer size – 82.mm x 82.5 mm
• Lower part internal cutout dia – 40.5mm
• Upper part outer size  - 65mm
• Upper part outer dia – 57mm
• No of Hole – 2 Holes for Lockout
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electrical Panel Lockout Device is used to protect the product switch / equipment to prevent uncertain condition caused by human error which is totally safe from any energy source.
• Material– Made from high strength transparent glass resin PC & ABS.
• Emergency switch or push button lockout device multi device is suitable for almost all the square lock switches.
• It can be installed by pressing and fixing tape / screw as per site requirement.
• Lower Part Square Internal Cutout Size – 74x74mm
• Lower Part Square Outer Size – 100x100mm
• Overall Height – 75mm
• Color– Shade transparent glass.
• Hole Dia – 7.8mm
• No. of Holes – 3
• Weight – 120gms
• Note: This product has volumetric weight due to size and shape, So that 10Pcs of product weight is calculated as per 4.5kg (volumetric size: 36*24*24)

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Made from ABS  and mild steel plate.
• Size of Yellow part : 53x51 mm with provision of hole.
• Size of Metal part : 78.5mm x 40 mm , but  cantilever part  from yellow base : 40mm x 40mm x 23 mm ( center height )
• Yellow Base Part can be fixed by double sided tape or screw.
• Different shape lockouts can be customized on quantity basis.
• Can put over button switch and lock hole for distribution cabinet’s lockout device as shown in image to prevent accident.
• Always use Lockout Tagout while shutdown and maintenance work.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com,krm@krmcorporation.com

• Electric Panel lockout device is used to protect the emergency stop button to prevent uncertain condition caused by human error which is totally safe from ? any energy source.
• Material – Strong Polycarbonate body. Large Electric Panel Lockout device is combination of two parts- lower part square shape with provision of 4holes & super strong adhesive tape, upper parts in round shape.
• Two holes are provided for group locking purpose.
• Outer square base – 95 mm X 95 mm with inner round diameter 78 mm.
• Upper Round Size – Internal diameter 80 mm and depth 65 mm.
• Color – Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electrical Panel Lockout is used to lock nearly all electrical panels and covers that are installed with exposed screws threaded into the panel back-box, preventing the panel so that by mistake no one operates the panel.
• Material – ABS  material. For locking purpose one Padlock eye-molded ABS. Can be used with lockout hasp.
• Provision of 4 small molded holes on back side of border of box to hang on any surface.
• Can put double side tape on back border to stick on any electrical panel surface.
• Dimension Upper Part – Height – 120mm x Width – 190mm x Depth – 25mm
• Dimension Inner Part – Height – 115mm x Width – 185mm x Depth – 22mm
• It can carry on any isolation area, indoor and outdoor application suitable in moisture and even in corrosion area.
• Color – Grey, Yellow, White or can make as per requirement on the basis of quantities required.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electrical Panel Lockout is used to lock nearly all electrical panels and covers that are installed with exposed screws threaded into the panel back-box, preventing the panel so that by mistake no one operates the panel.
• Material – ABS  material. For locking purpose one Padlock eye-molded ABS. Can be used with lockout hasp.
• Provision of 4 small molded holes on back side of border of box to hang on any surface.
• Can put double side tape on back border to stick on any electrical panel surface.
• Dimension Upper Part– Height – 120mm x Width – 190mm x Depth – 25mm
• Dimension Inner Part – Height – 115mm x Width – 185mm x Depth – 22mm
• It can carry on any isolation area, indoor and outdoor application suitable in moisture and even in corrosion area.
• Color – Grey, Yellow, White or can make as per requirement on the basis of quantities required.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electrical Panel Lockout is used to lock nearly all electrical panels and covers that are installed with exposed screws threaded into the panel back-box, preventing the panel so that by mistake no one operates the panel.

• Material – Poly carbonate. For locking purpose one Padlock eye-molded polycarbonate. Can be used  with lockout hasp.
• Provision of 4 small molded holes on back side of border of box to hang on any surface.
• Can put double side tape on back border to stick on any electrical panel surface.
• Dimension Upper Part – Height – 120mm x Width – 190mm x Depth – 25mm
• Dimension Inner Part – Height – 115mm x Width – 185mm x Depth – 22mm
• It can carry on any isolation area, indoor and outdoor application suitable in moisture and even in corrosion area.
• Color – Transparent

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Strong Polycarbonate body electrical panel lockout multi devices is suitable for almost all the square lock switches and can be install by pressing and fixing with screw.
• Two holes for locking is provided and provision of hole in base part is also available.
• Outer square base – 66 mm X 66 mm.
• Inner Square Base – 45 mm x 45 mm.
• Upper Part of  Internal Size – 53 mm x 53 mm.
• Depth – 60 mm.
• Color – Transparent glass.
• Electrical Panel Lockout with chain

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Emergency switch or push button lockout device is used to protect the emergency push button to prevent uncertain condition caused by human error.
• Material - Strong polycarbonate body.
• Emergency Push Button Lockout multiple devices is suitable for almost all the square lock switches which can be install by pressing and fixing with screw.
• Two holes for locking is provided and provision of hole in base part is also available.
• Outer square base – 66 x 66 mm
• Inner base size – 45 x 45 mm
• Upper part of Internal Size – 50 x 50 mm depth 30/33 mm
• Weight - 45 gms
Color- Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Mild steel sheet duly powder coated with locking arrangement

• Multipurpose Lockout Device is used to lock multiple device can be able to set up in rigid situation. It can also with stand against corrosion, temperature and chemical effects. For the latching purpose one eye is provided.
• Size of KRM-K-MCBLB Height 11”X Width 6” X Depth -1”
• Also available in different dimensions, color and printed (Caution or warning) on it supplied as per the demand.
• Accessible by strong double sided tape for fixing it intensely having one latch for locking.
• Weight - 400gms
• Color - Grey, Yellow, Red or as per the quantity required.
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Mild steel sheet duly powder coated with locking arrangement
• Multipurpose Lockout Device is used to lock multiple device can be able to set up in rigid situation. It can also with stand against corrosion, temperature and chemical effects. For the latching purpose one eye is provided.
• Size of KRM-K-MEPB-753 Height 17” X Width 15”  X Depth 3.5”
• Also available in different dimensions, color and printed (Caution or warning) on it supplied as per the demand.
• Accessible by strong double sided tape for fixing it intensely having one latch for locking.
• Weight - 2800gms
• Color - Grey, Yellow, Red or as per the quantity required.
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Body made of metallic, attached with rivet.
• Round Shape metal  lockout device is used to lock the racking in-out point of air circuit breaker and Vacuum circuit breaker so that no one can operate the particular device, also can lock some sort of switches that are inserted inside a plain surface
• Made by riveting two pieces which can be easily rotated in any direction having three holes at bottom part to fix with the screw and also can be sticked with the strong double sided pre adhesive on requirement for locking purpose.
• Dimension – Outer diameter is 65 mm, Inner diameter is 51 mm,
• lower cover circle side width is  7 mm, overall thickness is 5 mm
• Weight - 70 gms
• Color - Standard Color Grey.
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Body made of metallic, attached with rivet.
• Round Shape metal  lockout device is used to lock the racking in-out point of air circuit breaker and Vacuum circuit breaker so that no one can operate the particular device, also can lock some sort of switches that are inserted inside a plain surface
• Made by riveting two pieces which can be easily rotated in any direction having three holes at bottom part to fix with the screw and also can be sticked with the strong double sided pre adhesive on requirement for locking purpose.
• Weight - 110 gms
• Color - Standard Color Grey
• 3 Buffer ,
• 4 Rivet , 3 Washer ,
• 1KRM-K-PDE-R-DL
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always

Note - Price of the product involves the basic cost of the product,whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electrical Panel lockout device is used to protect the emergency stop button to prevent uncertain condition caused by human error.
• Material - Strong polycarbonate body.
• Electrical panel lockout multiple devices is suitable for almost all the square lock switches which can be install by pressing and fixing with screw.
• Two holes for locking is provided and provision of hole in base part is also available.
• Outer square base – 66 x 66 mm
• Inner base size – 45 x 45 mm
• Upper part of Internal Size – 53 x 53 mm
• Depth – 30 mm
• Color – Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com