Circuit breaker lockout

• Multi-pole universal circuit breaker lockouts are made of  ABS & nylon with  standard steel bolt  & are compatible with most two /  three pole breakers with a tie-bar.
• Tighten the  top screw to clamp the breaker lockout  over the tie bar,
• Insert/ put  the lock to prevent the clamp from being loosened
• This lockout device isolates and secures  Specific circuit breaker switches to protect employees/workers against electrical accidents during  maintenance / shutdown
• Proper lockout  on equipment's always  save the life of human beings who work on equipment's
• Weight – 30gm each pieces.
• NOTE:-Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be paid by the buyer always.

• Pin type circuit breaker lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the hole of the MCB. Can be used for single pole circuit breaker, required no tools for installation.
• Material – Nylon, ABS, Metallic PIN and Spring
• KRM MCB Pin Lockout is applicable on the circuit breakers for energy isolation, always used when energy source is in switched OFF condition.
• The device with wire clips will move into position so as to adjust behind
• the toggle of the circuit breaker. As the device will fit on to the circuit     
• then can lock using the padlock.
• The lockout can take padlock with a hole dia 8mm
• Suitable for small sized circuit breaker.
• Color – Yellow , Red  or as per the quantity required.
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

• Material -  made of  aluminum alloy.
• Suitable for small size circuit breaker
• Can be placed on a small screw driver to loosen the screw and  then fit circuit breaker lockout on the MCB and tighten the screw.
• Once done place the padlock to complete lockout.
• Put padlock insert with or without tag after tight the screw.
• Dimension – Height- 25mm width-20mm, depth-6mm ,
• Hole dia – 8mm
• Color – Gold
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always

• Pin Type Circuit Breaker Lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. 
• Can be used for two, three or four pole circuit breaker, required no tools for installation and available as Pin In, pin Out and wide type. 
• Material - Nylon with metallic PIN. 
• KRM MCB Lockout molded pin type is suitable for single, double, triple and four pole circuit breaker, it is easy to use and offer a flawless lockout solution, with the pin having high tensile steel grade strength. 
• Color - Green, Blue, Yellow, Red or any color as per any color as per volume. 
• Dimension - Outer size - 63.3 mm length, 23.3 mm width, 14 mm. 
• Weight - 20 gm.

• Material - High Quality ABS with metallic screw. KRM Circuit Breaker lockout is available with four options that is with nose, without nose, with foldable screw and normal/plain screw. 
• Plain or normal screw type device can be tighten up with the help of screw driver and foldable screw type device that can be installed directly without the help of any extra tool.
• The device is UV Resistant and it is suitable for single, double, triple and four pole also can be fitted on switches of 30" to 90" height.
• Color - Blue, Red, Yellow, Green ar can make as per quantity required.
• Dimension - Centre to centre length 49 mm, width at centre 23 mm, Width at locking end 13.5 mm, thickness 25 mm, Internal Hole diameter 8 mm, average centre internal grip 12.5 mm.
• Weight - 35 gm for with foldable screw, 22 gm of normal screw type and 40 gm of with nose type screw.

• Material - High Quality ABS with metallic screw. KRM Circuit Breaker lockout is available with four options that is with nose, without nose, with foldable screw and normal/plain screw. 
• Plain or normal screw type device can be tighten up with the help of screw driver and foldable screw type device that can be installed directly without the help of any extra tool.
• The device is UV Resistant and it is suitable for single, double, triple and four pole also can be fitted on switches of 30" to 90" height.
• Color - Blue, Red, Yellow, Green ar can make as per quantity required.
• Dimension - Centre to centre length 49 mm, width at centre 23 mm, Width at locking end 13.5 mm, thickness 25 mm, Internal Hole diameter 8 mm, average centre internal grip 12.5 mm.
• Weight - 35 gm for with foldable screw, 22 gm of normal screw type and 40 gm of with nose type screw.

• Material - High Quality ABS with metallic screw. 
• KRM Circuit Breaker lockout is available with four options that is with nose, without nose, with foldable screw and normal/plain screw. 
• Plain or normal screw type device can be tighten up with the help of screw driver and foldable screw type device that can be installed directly without the help of any extra tool. 
• The device is UV Resistant and it is suitable for single, double, triple and four pole also can be fitted on switches of 30" to 90" height. 
• Color - Blue, Red, Yellow, Green ar can make as per quantity required. 
• Dimension - Centre to centre length 49 mm, width at centre 23 mm, Width at locking end 13.5 mm, thickness 25 mm, Internal Hole diameter 8 mm, average centre internal grip 12.5 mm. 
• Weight - 35 gm for with foldable screw, 22 gm of normal screw type and 40 gm of with nose type screw.

• Material - High Quality ABS with metallic screw. 
• KRM Circuit Breaker lockout is available with four options that is with nose, without nose, with foldable screw and normal/plain screw. 
• Plain or normal screw type device can be tighten up with the help of screw driver and foldable screw type device that can be installed directly without the help of any extra tool. 
• The device is UV Resistant and it is suitable for single, double, triple and four pole also can be fitted on switches of 30" to 90" height. 
• Color - Blue, Red, Yellow, Green ar can make as per quantity required. Dimension - Centre to centre length 49 mm, width at centre 23 mm, Width at locking end 13.5 mm, thickness 25 mm, Internal Hole diameter 8 mm, average centre internal grip 12.5 mm. 
• Weight - 35 gm for with foldable screw, 22 gm of normal screw type and 40 gm of with nose type screw.

• Material Nylon, ABS, Metallic PIN and Spring
• KRM Pin In Circuit Breaker Lockout is applicable on the circuit breakers for energy isolation, always used when energy source is in switched OFF condition.
• The device can be installed directly without the assistance of any extra tool, having high tensile strength and is suitable for single, double, triple and four pole circuit breaker.
• Length of Pin can be expanded up to 8.5 mm on pressing the back side with the help of thumb.
• Color Green Black, Red Black, Yellow Black, Blue Black options or as per the quantity required.
• Outer Size Overall length in closed Position 43 mm, Edge Width at Green end 16.5 mm, Centre Width at Black Portion 17 mm, Grip Holder Black Length 24 mm, Grip Holder Black Width 24 mm
• Weight 7 gm

Pin type circuit breaker lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. Can be used for one, two, three or four pole circuit breaker, required no tools for installation and available as pin in, pin out and pin wide type.
Material Nylon, ABS, Metallic PIN and Spring
KRM Pin Out Circuit Breaker Lockout is applicable on the circuit breakers for energy isolation, always used when energy source is in switched OFF condition.
The device can be installed directly without the assistance of any extra tool, having high tensile strength and is suitable for single, double, triple and four pole circuit breaker.
Length of Pin can be expanded up to 8.5 mm on pressing the back side with the help of thumb.
Color Green Black, Red Black, Yellow Black, Blue Black options or as per the quantity required.
Outer Size Overall length in closed Position 43 mm, Edge Width at Green end 16.5 mm, Centre Width at Black Portion 17 mm, Grip Holder Black Length 24 mm, Grip Holder Black Width 24 mm
Weight 7 gm

• Pin type circuit breaker lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. 
• Can be used for one, two, three or four pole circuit breaker, required no tools for installation and available as pin in, pin out and pin wide type.
• Material Nylon, ABS, Metallic PIN and Spring
• KRM Pin Out Wide Circuit Breaker Lockout is applicable on the circuit breakers for energy isolation, always used when energy source is in switched OFF condition.
• The device can be installed directly without the assistance of any extra tool, having high tensile strength and is suitable for single, double, triple and four pole circuit breaker.
• Length of Pin can be expanded up to 8.5 mm on pressing the back side with the help of thumb.
• Color Green Black, Red Black, Yellow Black, Blue Black options or as per the quantity required.
• Outer Size Overall length in closed Position 43 mm, Edge Width at Green end 16.5 mm, Centre Width at Black Portion 17 mm, Grip Holder Black Length 24 mm, Grip Holder Black Width 24 mm
• Weight 7 gm

• Pin type circuit breaker lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. 
• Can be used for one, two, three or four pole circuit breaker, required no tools for installation and available as pin in, pin out and pin wide type.
• Material Nylon, ABS, Metallic PIN and Spring
• KRM Pin In Circuit Breaker Lockout is applicable on the circuit breakers for energy isolation, always used when energy source is in switched OFF condition.
• The device can be installed directly without the assistance of any extra tool, having high tensile strength and is suitable for single, double, triple and four pole circuit breaker.
• Length of Pin can be expanded up to 8.5 mm on pressing the back side with the help of thumb.
• Color Green Black, Red Black, Yellow Black, Blue Black options or as per the quantity required.
• Outer Size Overall length in closed Position 43 mm, Edge Width at Green end 16.5 mm, Centre Width at Black Portion 17 mm, Grip Holder Black Length 24 mm, Grip Holder Black Width 24 mm
• Weight 7 gm

• Pin type circuit breaker lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. 
• Can be used for one, two, three or four pole circuit breaker, required no tools for installation and available as pin in, pin out and pin wide type.
• Material Nylon, ABS, Metallic PIN and Spring
• KRM Pin Out Wide Circuit Breaker Lockout is applicable on the circuit breakers for energy isolation, always used when energy source is in switched OFF condition.
• The device can be installed directly without the assistance of any extra tool, having high tensile strength and is suitable for single, double, triple and four pole circuit breaker.
• Length of Pin can be expanded up to 8.5 mm on pressing the back side with the help of thumb.
• Color Green Black, Red Black, Yellow Black, Blue Black options or as per the quantity required.
• Outer Size Overall length in closed Position 43 mm, Edge Width at Green end 16.5 mm, Centre Width at Black Portion 17 mm, Grip Holder Black Length 24 mm, Grip Holder Black Width 24 mm
• Weight 7 gm

• Pin type circuit breaker lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. 
• Can be used for one, two, three or four pole circuit breaker, required no tools for installation and available as pin in, pin out and pin wide type.
• Material Nylon, ABS, Metallic PIN and Spring
• KRM Pin Out Circuit Breaker Lockout is applicable on the circuit breakers for energy isolation, always used when energy source is in switched OFF condition.
• The device can be installed directly without the assistance of any extra tool, having high tensile strength and is suitable for single, double, triple and four pole circuit breaker.
• Length of Pin can be expanded up to 8.5 mm on pressing the back side with the help of thumb.
• Color Green Black, Red Black, Yellow Black, Blue Black options or as per the quantity required.
• Outer Size Overall length in closed Position 43 mm, Edge Width at Green end 16.5 mm, Centre Width at Black Portion 17 mm, Grip Holder Black Length 24 mm, Grip Holder Black Width 24 mm
• Weight 7 gm

• Pin Type Circuit Breaker Lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. 
• Can be used for two, three or four pole circuit breaker, required no tools for installation and available as Pin In, pin Out and wide type.
• Material - ABS with metallic threaded bolt and steel strip
• KRM Tie Block Or Bar Circuit Breaker Lockout is easy to fix tightly by the use of adjustable upper thumb Wheel operation that is suitable for large or multiple pole circuit breaker,
• Color - Standard color Red and Blue or any color as per the required quantity.
• Dimension - Outer Size - length with bolt 57 mm, without bolt 47 mm, average width 24 mm, average thickness 13 mm, width at locking ends 33.5 mm, internal Hole diameter 7.5 mm
• Weight - 30 gm