Search results for: 'top game tai xiuLợi nhuận ổn định（splay01.win）top game tai xiuLợi nhuận ổn định（splay01.win）w4t'

• PART-1 – (KRM-K-CBLM-104) Size – Length – 85 mm x Width – 50 mm x Height – 59 mm
• PART-2 – (KRM-K-CBLL-102 ) Suits to One or Two Way - Easy to handle and suitable for indoor and outdoor applications 
• PART-3 – (KRM-K-RMCLT-6CL) KRM LOTO Round Multipurpose Cable Lockout with knob grip for rotation used to the installed devices for safety purposes that is made with two parts, upper part having six holes and lower part having eight holes.

Installation Procedure

• TURN THE BOTH VALVE LEVER IN OFF CONDITION
• FIRST FIX PART 1 & 3 ON TWO DIFFERENT LEVER OF VALVE , TIGHT IT.
• AFTER THAT , PUT CABLE OF PART 2 THROUGH HOLE IN
• PART 1 ,THEN PART 3
• ROTATE THE CABLE THROUGH PIPE AND PASS WIRE
• THROUGH SLOT OF PART 2
• ROTATE THE ROUND UPPER KNOB PART AND MAKE IT TIGHT
• PUT LOCK AND TAG TO COMPLETE ISOLATION OF 2 DEVICES

• PART-1 – (KRM-K-RMCLT-6CL) KRM LOTO Round Multipurpose Cable Lockout with knob grip for rotation used to the installed devices for safety purposes that is made with two parts, upper part having six holes and lower part having eight holes
• PART-2 – (KRM-K-CBLL-102 ) Suits to One or Two Way - Easy to handle and suitable for indoor and outdoor applications.

Installation Procedure

• Turn lever of valve in off condition
• FIRST FIX PART 2 ON LEVER OF VALVE , TIGHT IT.
• AFTER THAT , PUT CABLE OF PART 1 THROUGH HOLE IN PART 2 
• ROTATE THE CABLE THROUGH PIPE AND PASS WIRE THROUGH SLOT OF PART 1 
• ROTATE THE ROUND UPPER KNOB PART AND MAKE IT TIGHT 
• PUT LOCK AND TAG TO COMPLETE ISOLATION

• Material – Made of 3 mm thick ACP (Aluminium Composite Panel) sheet. 

• KRM-K-LTPCH-10H+1P – With 10 ABS hooks to hang different LOTO items.
• One ABS tag holder pocket to place tags and other LOTO items.
• Size – 12” x 15”
• Weight – 1.5kgs
• Can hang 2 locks in a single loop.
• Provision of four pre drilled holes on back to mount it on any surface.
• Can be used at any temperature low or high.
• Color – Yellow or as per the quantity required.
• Freight will be charged on the basis of actual or volumetric weight whichever will be higher.
• NOTE: - Customized Design according to the requirement can be made with different pockets and slotter.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material – Made of 3 mm thick ACP (Aluminium Composite Panel) sheet. 

• Size - 12" x 12".
• With 3 small layers, consisting of 7 holes in a single layer to hang different LOTO items.
• Can hang 4 locks in proper position and 3 hasp in a single loop.
• One ABS tag holder pocket to place tags and other LOTO items.
• Provision of four pre drilled holes on back to mount it on any surface.
• Can be used at any temperature low or high.
• Weight – 1 kgs
• Color – Yellow or as per the quantity required.
• NOTE: - Customized Design according to the requirement can be made with different pockets and slotter.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material – ABS
• KRM Snap On Breaker Lockout Device is suitable for breakers having holes on switch’s tongue. Also having double cavities space that can be accommodated on different size switch tongues.
• Only one padlock can be placed on the device for locking.
• Specially designed for 120 Volts of Snap on circuit breakers.
• Dimension – Height – 54mm, Width – 21mm, Depth – 8.5mm    
• Hole Diameter – 7.5 mm
• Color – Standard color Red or can make as per the required quantity.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• 1. KRM-K-DS, KRM loto-Display station Size – 18 “ X 15” X 2” , No-1
• 2. KRM-K-MCBL-C3, COMBO - Pin Type Circuit Breaker Lockout, NO-1
• 3. KRM-K-MCBL-Y –SS, Mini Circuit Breaker Lockout with special  foldable screw - yellow,No-1
• 4. KRM-K-CBL-B –SS, Circuit Breaker Lockout with special foldable screw – blue, No-1
• 5. KRM-K-DMCBL, Multi function Circuit Breaker Lockout, No-1
• 6. KRM-K-UCBL-R-P-1, Universal Circuit Breaker Lockout with plain screw, No-1
• 7. KRM-K-UCBL-R-N-1, Universal Circuit Breaker Lockout with Nose, No-1
• 8. KRM-K-3ESSPBL-T, Emergency Push Button Lockout – Transparent, No-1
• 9. KRM-K-GVL-02, Gate Valve Lockout - 25 to 63.5 mm, No-1
• 10. KRM-K-GVL-06= KRM-K-NMDLA-R, Gate Valve Lockout -  RED - Adjustable type BIG SIZE - 25 MM to 190 mm, No-1
• 11. KRM-K-BV-01-ST, Ball Valve Lockout for Valves upto 9.5 mm to 31.5mm, No-1
• 12. KRM-K-ULD-WLA-1- 15, Universal Valve lockout devices  + One Long Arm with lower bottom jaw grip - 15mm, No-1
• 13. KRM-K-MPS+2C, Multipurpose Cable Lockout with 2 mtrs cable, No-1
• 14. KRM-K-TEPBL-23, KRM LOTO - Emergency Push Button Lockout, No-1
• 15. KRM-K- EPL-S, KRM LOTO - Multi devices- EMERGENECY push button Lockout- outer square, No-1
• 16. KRM-K-RSDEL, Round Shape Di Electric Lockout, No-1
• 17. KRM-K-OSLTP-MDK, OSHA Safety Lock Tag Padlock - Metal Shackle - Differ Key, No-3
• 18. KRM-K-OSLTP-NDK, OSHA Safety Lock Tag Padlock - Nylon Shackle - Differ Key, No-3
• 19. KRM-K-LT-2C, Do Not Operate Tags (Set of 10 pcs), 1Set
• 20. KRM-K-LTMGB, Lockout Tagout Manual Information guide / book, No-1
• 21. KRM-K-CD, Lockout Tagout CD Having presentation data / movie, No-1
• 22. KRM-K-MTH, KRM LOTO  Multipurpose TAG HOLDER  (WITHOUT MATERIAL)                No-1
• 23. KRM-K-MSHR12, MS Rod with 9 hooks for padlocks  No-2
• 24. KRM-K-LTSS 15, Lockout Tagout Safety  Labels  signs.Size : 100 x 150MM, No-1
• NOTE:-Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be paid by the buyer always.

• 1. KRM-K-OLTPK, KRM LOTO - TRANPARENT POUCH No-1,
• 2. KRM-K-OSLTP-MDK, OSHA Safety Lock Tag Padlocks / Locks - 38 mm Height - Metal Shackle Color-Red Orange NO-2,
• 3. KRM-K-OSLTP-NDK, OSHA Safety Lock Tag Padlocks / Locks -- 38 mm Height - NYLON Shackle Color- Red NO-1,
• 4. KRM-DJCH, Hasp with double jaw with 8 holes NO-1,
• 5. KRM-K-VCH-R-S25, Vinyl Molded coated Hasp - Small - jaw dia -25 mm - RED  NO-1,
• 6. KRM-K-VCH-R-P38/39, Vinyl Molded coated Hasp - Premier -jaw dia -38/39mm – RED No-1,
• 7. KRM-K-RSDEL, Round Shape Di-Electric Lockout No-1,
• 8. KRM-K-UCBL-R-P-SS, Universal Circuit Breaker Lockout with special foldable screw-Red No-1,
• 9. KRM-K-UMCBL-RB, KRM LOTO – UNIVERSAL MINI CIRCUIT BREAKER LOCKOUT COMBINATION OF RED & BLACK No-1,        
• 10. KRM-K-CBLM-105, KRM LOTO – CIRCUIT BREAKER LOCKOUT  NO-1,
• 11. KRM-K-CBL-3, CIRCUIT BREAKER LOCKOUT - ONE POLE NO-1,
• 12. KRM-K-CBLM-101, KRM LOTO – CIRCUIT BREAKER LOCKOUT – MEDIUM No-1,
• 13. KRM-K-LT-2C, Lockout Tags (SET OF 10pcs) 1set,
• NOTE:-Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be paid by the buyer always.

• 1. KRM-K-L-BG-B, LOCKOUT TAGOUT BAGS No-1,
• 2. KRM-K-VCH-R-S 25, Vinyl Molded Coated Hasp - Small - Jaw Dia - 25mm NO-2,
• 3. KRM-K-MCBL-C3, Combo of Mini Circuit Breaker Lockout - Pin Type - Having 1 Set = 3 No 1Set,
• 4. KRM-K-LCBL-T-R-1, Large Circuit Breaker Lockout with provision of molded teeth for strong grip - Round Upper, No-1,
• 5. KRM-K-UCBL-R-N-SS Universal Circuit Breaker Lockout with nose at base with special
•  Foldable screw – Red No-1,
• 6. KRM-K-UCBL-R-P-1, Universal Circuit Breaker Lockout - Plain with normal screw, No-1,
• 7. KRM-K-MCBL-Y-SS, Mini Circuit Breaker Lockout with special foldable screw – Yellow No-1,
• 8. KRM-K-DMCBL, Multifunction Circuit Breaker Lockout No-1,
• 9. KRM-K-RMCLT-6CL-R, Round Multipurpose Cable Lockout with Loop – Red No              1,
• 10. KRM-K-EPL-S, KRM LOTO - Multi Device - Emergency Push Button Lockout No-2,
• 11. KRM-K-MPBSL-R-ROUND, KRM LOTO Mushroom Push Button / Emergency Switch Safety Lockout - Milky Transparent / Red No-1,
• 12. KRM-K-RSDEL, Round Shape Di - electric Lockout device No-1,
• 13. KRM-K-MPCL-R, Red - Mini Plug Chord Lockout No-1,
• 14. KRM-K-GVL-06 ,Gate Valve Lockout - Red - Adjustable Type BIG Size - 25 mm to 190 mm No-1,
• 15. KRM-K-BV-01-LL, Ball Valve Lockout - Standard - Small with open lengths for valve up to 2-1/2 No-1,
• 16. KRM-K-ULDWLA 1-15, Universal Valve Lockout Device + One Long Arm with Lower Bottom Jaw Grip No-1,
• 17. KRM-K-OSLTP-C-MDK, OSHA Safety Isolation Padlocks - with metal shackle Differ Key NO-4,
• 18. KRM-K-OSLTP-C-NDK, OSHA Di-electric Isolation Padlock with Nylon shackle Alike KeyNo-4,
• 19. KRM-K-RINGWOM   Key Ring without Matter No-5,
• 20. KRM-K-LTMGB, Lockout Tag out Manual Information Guide / Book No-1,
• 21. KRM-K-PEN Rewritable Pen / Marker with Eraser NO-1,
• 22. KRM-K-LT-2C, Lockout Tags - 2 Color printing NO-10,
• 23. KRM-K-SDR-2, Screw Driver NO-1,
• 24. KRM-K-RLTP Red Lockout Pouch NO-1,
• 25. KRM-L-LM3 Lockout Point Marker 3 NO-5,
• 26. KRM-K-LTSS 15, Lockout Safety Labels 100X150mm NO-5,
• NOTE:-Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be paid by the buyer always.

• 1. KRM-K-PCLS-Y, Lockable Lockout Station, Size: 16"x14"x6" No-1,
• 2. KRM-K-VCH-R-S 25, Vinyl Molded Coated Hasp - Small - Jaw Dia - 25mm NO-2,
• 3. KRM-K-MCBL-C3, Combo of Mini Circuit Breaker Lockout - Pin Type - Having 1 Set = 3 No 1Set,
• 4. KRM-K-LCBL-T-R-1, Large Circuit Breaker Lockout with provision of molded teeth for strong grip - Round Upper, No-1,
• 5. KRM-K-UCBL-R-N-SS Universal Circuit Breaker Lockout with nose at base with special foldable screw – Red No-1,
• 6. KRM-K-UCBL-R-P-1, Universal Circuit Breaker Lockout - Plain with normal screw, No-1,
• 7. KRM-K-MCBL-Y-SS, Mini Circuit Breaker Lockout with special foldable screw – Yellow No-1,
• 8. KRM-K-DMCBL, Multifunction Circuit Breaker Lockout, No-1,
• 9. KRM-K-RMCLT-6CL-R, Round Multipurpose Cable Lockout with Loop – Red No-1,
• 10. KRM-K-EPL-S, KRM LOTO - Multi Device - Emergency Push Button Lockout No-2,
• 11. KRM-K-MPBSL-R-ROUND, KRM LOTO Mushroom Push Button / Emergency Switch Safety Lockout - Milky Transparent / Red No-1,
• 12. KRM-K-RSDEL, Round Shape Di - electric Lockout device No-1,
• 13. KRM-K-MPCL-R, Red - Mini Plug Chord Lockout No-1,
• 14. KRM-K-GVL-06 ,Gate Valve Lockout - Red - Adjustable Type BIG Size - 25 mm to 190 mm No-1,
• 15. KRM-K-BV-01-LL, Ball Valve Lockout - Standard - Small with open lengths for valve up to 2-1/2 No-1,
• 16. KRM-K-ULDWLA 1-15, Universal Valve Lockout Device + One Long Arm with Lower Bottom Jaw Grip No-1,
• 17. KRM-K-OSLTP-C-MDK, OSHA Safety Isolation Padlocks - with metal shackle Differ Key NO-4,
• 18. KRM-K-OSLTP-C-NDK, OSHA Di-electric Isolation Padlock with Nylon shackle Alike Key No-4,
• 19. KRM-K-RINGWOM   Key Ring without Matter No-5,
• 20. KRM-K-LTMGB, Lockout Tag out Manual Information Guide / Book No-1,
• 21. KRM-K-PEN Rewritable Pen / Marker with Eraser NO-1,
• 22. KRM-K-LT-2C, Lockout Tags - 2 Color printing NO-10,
• 23. KRM-K-SDR-2, Screw Driver NO-1,
• 24. KRM-K-RLTP Red Lockout Pouch NO-1,
• 25. KRM-L-LM3 Lockout Point Marker 3 NO-5,
• 26. KRM-K-LTSS 15, Lockout Safety Labels 100X150mm NO-5,
• NOTE:-Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be paid by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Pin type circuit breaker lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. Can be used for one, two, three or four pole circuit breaker, required no tools for installation and available as pin in, pin out and pin wide type.
• Material - Nylon, ABS, Metallic PIN and Spring
• KRM Pin Out Circuit Breaker Lockout is applicable on the circuit breakers for energy isolation, always used when energy source is in switched OFF condition.
• The device can be installed directly without the assistance of any extra tool, having high tensile strength and is suitable for single, double, triple and four pole circuit breaker.
• Length of Pin can be expanded up to 8.5 mm on pressing the back side with the help of thumb.
• Outer Size - Overall length in closed Position 43 mm, Edge Width at Green end 16.5 mm, Centre Width at Black Portion 17 mm, Grip Holder Black Length 24 mm, Grip Holder Black Width 24 mm
• Weight - 30 gm
• Color - Green Black, Red Black, Yellow Black, Blue Black options or as per the quantity required.

• Electric Panel Lockout is used to lock nearly all electric panels and covers that installed with exposed screws threaded into the panel back-box.
• Preventing the panel so that by mistake no one operates the panel. Different shapes are available for different sizes.
• Material - ABS base with steel or strong polypropylene strip.
• Electrical Handle Lockout for electrical panel is made of four parts which is used to block the movement of handles and lever installed at electric panel, is available with or without lock.
• Locking Slot - Two holes or strong adhesive at base part so that it can be sticked solidly within some hour and also can be screwed for tight sticking on oily surface and then locked by the padlock.
• Size of Base - Diameter is 59 mm, thickness 10 mm and size of SLOTTER part is 25 mm x 18 mm x 7 mm.
• Steel / Plastic grip with edge to edge length is 435 mm, width 19 mm, with multiple holes of 9 mm for group isolation purpose.
• Weight - 40 gm for steel strip with 100 gm of padlock
• Color - Yellow Base with metal or plastic strip.
• NOTE:- Base Plate or panel is available in both option either can go with yellow or red 
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• 1. KRM-K-LEB-M, LOCKOUT TAGOUT BAG Red, No-1
• 2. KRM-K-VCH-R-S25, Vinyl Molded coated Hasp - Small - jaw dia -25 mm – RED, No-1
• 3. KRM-K-VCH-P38/39-B, Vinyl Molded coated Hasp-Premier -jaw dia -38/39mm – BLUE, No-1
• 4. KRM-K-MCBL-G 1, Mini Circuit Breaker Lockout with normal screw – Green, No-1
• 5. KRM-K-UCBL-R-N1, Universal Circuit Breaker Lockout with nose and normal screw, No-1
• 6. KRM-K-CBL-B-P-1, Circuit Breaker Lockout with normal screw -  blue, No-1
• 7. KRM-K-MCBL-Y1, Mini Circuit Breaker Lockout with normal screw – Yellow, No-1
• 8. KRM-K-UCBL-R-P-SS, Universal Circuit Breaker Lockout with special foldable screw – Red,No-1
• 9. KRM-K-LCBL-T-R 1, Large Circuit Breaker Lockout with provision of molded teeth for strong grip- Round upper, No-1
• 10. KRM-K-GVL-02, KRM LOTO Gate Valve Lockout with one hole - 25 to 63.5 mm ( 1" - 2½" inch),No-1
• 11. KRM-K-BLK-L, KRM LOTO Breaker Lockout KIT, 1Set
• 12. KRM-K-NT, Nylon Ties for Tags (set of 10),1Set
• 13. KRM-K-MEPL, Electrical Panel Lockout,No-1
• 14. KRM- K-DLEPL-P, Electrical Panel Lockout in Double large -Outer size 104 x 104 x 95mm , No-1
• 15. KRM-K-DEH-63, Non Conductive Hasp  with 4 holes Shackle thickness 6mm, No-1
• 16. KRM-K-DEH-33, Non Conductive Hasp  with 4 holes Shackle thickness 3mm, No-1
• 17. KRM-K-NH 8,Di-electric Multi Device HASP with 8 holes , No-1
• 18. KRM-K-DEH-64, Dielectric Hasp with 6 holes . RED,No-1
• 19. KRM-K-MPS+2C ,Multi Purpose Cable Lockout in Scissor shape - with cable 2 Mtr.No-1
• 20. KRM-K-MCBL-C-3, Combo of Mini Circuit breaker lockout- PIN TYPE having -  3 no.s   Set-1
• 21. KRM-K-PEN, Rewritable Pen / Marker with eraser, No-1
• 22. KRM-K-OSLTP-MDK 'OSHA Safety Lock Tag  Padlocks / Locks - With differ key - 38 mm Height - Metal Shackle ,No-2
• 23. KRM-K-OSLTP-NDK  'OSHA Safety Lock Tag  Padlocks / Locks - With differ key - 38 mm Height - Nylon Shackle , No-1
• 24. KRM-K-LT-2C, LOCKOUT SAFETY TAGS (set of 10 pcs),1Set
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

• 1. KRM-K-VCH-R-S 25, Vinyl Molded Coated Hasp - Small - Jaw Dia - 25mm no-1

• 2. KRM-K-VCH-R-P 38/39, Vinyl Molded Coated Hasp - Premier - Jaw Dia - 38/39mm no-2
• 3. KRM-K-LTLH-AL 10, Label Hasp - Metal Base Sheet  no-1
• 4. KRM-K-EDLH, Economical Cable Lockout Hasp, no-1
• 5. KRM-K-DEH-33, Non Conductive hasp with 4 holes Shackle Thickness 3mm no-1
• 6. KRM-K-DEH-63, Non Conductive hasp with 4 holes Shackle Thickness 6mm no-1
• 7. KRM-K-NH-4, Di-Electric Multi device hasp with 4 holes no-1
• 8. KRM-K-DJCH-R, Hasp with double jaw with 8 holes - Red no-1
• 9. KRM-K-DEH-64, Di-Electric Hasp with 6 holes - Red no-1
• 10. KRM-K-NH-8, Di-Electric multi device hasp with 8 holes no-1
• 11. KRM-K-PCH-S25-R-12, Powder Coated hasp with 12 holes - Red  no-1
• 12. KRM-K-MCBL-C3, Combo of Mini Circuit Breaker Lockout - Pin Type - Having 1 Set = 3 Nos  1set
• 13. KRM-K-UFLD-SS, Universal Fuse/Circuit Breaker Lockout Devices with foldable screw no-1
• 14. KRM-K-ULCBL-N , Universal Large Circuit Breaker Lockout with normal screw,  no-1
• 15. KRM-K-LCBL-T-R-1, Large Circuit Breaker Lockout with provision of moulded teeth for strong grip - Round Upper no-1
• 16. KRM-K-UCBL-R-N-SS, Universal Circuit Breaker Lockout with nose at base with special foldable screw - Red  no-1
• 17. KRM-K-UCBL-R-P-1, Universal Circuit Breaker Lockout - Plian with normal screw no-1
• 18. KRM-K-MCBL-Y-SS, Mini Circuit Breaker Lockout with special foldbale screw – Yellow no-1
• 19. KRM-K-CBLTB-NT, Tie Block / Bar Circuit Breaker Lockout  no-1
• 20. KRM-K-CBL-B-NS, Circuit Breaker Lockout - Blue - with normal screw,no-1
• 21. KRM-K-DMCBL, Multifunction Circuit Breaker Lockout no-1
• 22. KRM-K-MMP-CBL-R4, Miniature Circuit Breaker Lockout - Molded Pin Type – Red no-1
• 23. KRM-K-BLK-L, KRM LOTO Breaker Lockout Kit - Large for (480-600V) no-1
• 24. KRM-K-RMCLT-6, Round Multipurpose cable lockout,no-1
• 25. KRM-K-PMLD+2C-R Multipurpose Lockout made of metallic material - Red + Cable 1set
• 26. KRM-K-EPL-S, KRM LOTO - Multi Device - Emergency Push Button Lockout no-1
• 27. KRM-K-MPBSL-R-ROUND, KRM LOTO Mushroom Push Button / Emergency Switch Safety Lockout - Milky Transparent / Red,no-2
• 28. KRM-K-TEPBL, KRM LOTO Emergency Push Button Lockout device made of polycarbonate no-1
• 29. KRM-K-EHLPWL, Electrical Handle Lockout with small padlock no-1
• 30. KRM-K-RSDEL, Round Shape Di - electric Lockout device, no-1
• 31. KRM-K-MPCL-R, Red - Mini Plug Chord Lockout no-1
• 32. KRM-K-INPCLD-R (RED), INPUT Power Cable Supply Lokcout Device RED COLOR no-1
• 33. KRM-K-PLC-2, Plug / Power Chord Lockout Device no-1
• 34. KRM-K-PNSL, Pneumatic Lockout Made of SS,no-1
• 35. KRM-K-GVL-06, OR KRM-K-NMDLA-R, Gate Valve Lockout - Red - Adjustable Type Size  - 25 mm to 190 mm no-1
• 36. KRM-K-BV-01-LL, Ball Valve Lockout - Standard - Small with open lengths for valve upto 2-1/2, no-1
• 37. KRM-K-ULDWLA 1-15, Universal Valve Lockout Device+One Long Arm with Lower Bottom Jaw Grip no 1
• 38.KRM-K-UMDL-EL-Y, Universal Multi Device Lockout Non-conductive product for Electrical Devices no1
• 39. KRM-K-LSPL-DK, OSHA Safety Isolation Padlocks - with Differ Key, no-3
• 40. KRM-K-LSPL-DE, OSHA Di-electric Isolation Padlock with Alike Key, no-2
• 41. KRM-K-PDE-R-L, Padlock Eye - Large - Right Angled - Pair  4set
• 42. KRM-K-PDE-R-S, Padlock Eye - Small - Right Angled - Pair 4set
• 43. KRM-K-RINGWOM, Key Ring Without Matter,no-5
• 44. KRM-K-LTMGB, Lockout Tagout Manual Information Guide / Book no-1
• 45. KRM-K-PEN, Rewritable Pen / Marker with Eraser no-1
• 46. KRM-K-LT-2C,Lockout Tags - 2 Color printing (Set of 10) 1set
• 47. KRM-K-SDR-2, Screw Driver no-1
• 48. KRM-K-RLTP,Red Lockout Pouch no-1
• 49. KRM-K-MLB, Molded Lockout Box Big, no-1
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

• 1. KRM-K-OSLTP-MDK, OSHA Safety Lock Tag Padlock - Metal Shackle - Differ Key-RED, no-2

• 2. KRM-K-RSDEL, Round Shape Di Electric Lockout, no-1
• 3. KRM-K-LT-2C, Lockout Tagout Tags (Set of 10pcs),1set
• 4. KRM-K-VCH-R-S25, Vinyl Molded Coated Hasp - Small - Jaw dia 25 mm, no-1
• 5. KRM-K-VCH-R-P 38/39, Vinyl Molded Coated Hasp - Premier - Jaw dia 38/39 mm, no-1
• 6. KRM-K-MPCL-R, Mini Plug Chord Lockout, no-1
• 7. KRM-K-PLC-2, Dual Large Plug Chord Lockout Device, no-1
• 8. KRM-K-RMCLT-6CL, Round Multipurpose Cable Lockout with loop, no-1
• 9. KRM-K-UCBL-R-4, Universal Cicuit Breaker Lockout (Set of 4 nos  with normal screw - 2 PLAIN + 2 WITH NOSE  )1set
• 10. KRM-K-PMLD+2C-R, Multipurpose Lockout made of Metalic material - Red + cable, no-1
• 11. KRM-K-UMDL-EL- Y, Universal Multi device Lockout Devices, no-1
• 12. KRM-K-PEN, Rewritable Marker Pen, no-1
• 13. KRM-K-CLOV, Cylinder Lockout valve,  no-1
• 14. KRM-K-LMC, Lockout Point Marker - COMBO (set of 3pcs),1set
• 15. KRM-K-LTSS 15, Lockout Tagout Safety  Labels  signs (Size - 100mm x 150mm), no-1
• 16. KRM-K-PCLS-Y,LOCKOUT TAGOUT STATION-16x14x6”WITH ONE SHELF-picture for refrence No-1
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

• 1. KRM-K-LEP-R,LOTO Handy Bag – Red, NOS-1
• 2. KRM-K-OSLTP-MDK, OSHA Safety Lock Tag Padlock - Metal Shackle - Differ Key - Colors of padlock for reference only,NO-3
• 3. KRM-K-PIN OUT CBL-2, Pin Out Circuit Breaker Lockout, NO-2
• 4. KRM-K-MCBL-Y-SS, Mini Circuit Breaker Lockout - with special foldable screw NO-1
• 5. KRM-K-EHLP, Electric Handle Panel Lockout - without padlock,NO-1
• 6. KRM-K-NT, Nylon Tie (Set of 10 pcs), 1Set
• 7. KRM-K-PEN, Rewritable / Marker Pen,NO-1
• 8. KRM-K-LT-2C, Do Not Operate Tags (Set of 10 pcs), 1Set
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.