Search results for: 'Ads【88SEO.CC】 too many youtube ads 】泰国海外广告平台【telegram∶@AK5537】seo教程seo教程【打开∶88SEO.CC】 緬甸谷歌推广开户 】w3r'

• Pin Type Circuit Breaker Lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. 
• Can be used for two, three or four pole circuit breaker, required no tools for installation and available as Pin In, pin Out and wide type. 
• Material - Nylon with metallic PIN. 
• KRM MCB Lockout molded pin type is suitable for single, double, triple and four pole circuit breaker, it is easy to use and offer a flawless lockout solution, with the pin having high tensile steel grade strength. 
• Color - Green, Blue, Yellow, Red or any color as per any color as per volume. 
• Dimension - Outer size - 63.3 mm length, 23.3 mm width, 14 mm. 
• Weight - 20 gm.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Mild Stainless Steel.
• KRM LOTO Metal Ball valve lockout easy to use, single piece design makes our standard ball valve lockout the perfect tool for securing your valve handles in the off position. Hole diameter 9/32" padlock shackles.
• For use of KRM-K-MBVL from 1.25" to 3" (9/32" lock holes).
• For use of KRM-K-MBVS from 1/4" to 1".
• Temperature Range - 40 degree to 248 degree.
• No of Holes - 8
• Color - Standard color Red or any color as per required quantity.
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Mild Stainless Steel.
• KRM LOTO Metal Ball valve lockout easy to use, single piece design makes our standard ball valve lockout the perfect tool for securing your valve handles in the off position. Hole diameter 9/32" padlock shackles.
• For use of KRM-K-MBVS from 1/4" to 1".
• Temperature Range - 40 degree to 248 degree.
• No of Holes - 6.
• Color - Standard color Red or any color as per required quantity.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Cylinder Device is used to lock pneumatic device. It does not require any extra tool for fixing only latched by the padlocks directly
• Material – Poly Propylene with printed label
• KRM Universal Multi-Device Lockout made by joining two parts that are designed to be used on high and low-pressure gas cylinders and control the cylinder by locking the regulator attachment, also useful for plug or chord lockout
• Locking slots – One hole to place the Lock
• Upper plates – Two or Three slots are attached with round rivet
• Outer Size – diameter 88 mm (3.45”), length 155 mm (6.10”)
• Can lockout equipment of size – 3.4” Width x 6” Length
• Color – Yellow, Red Or any color make as per required quantity •
• Weight – 120 gm

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM Large Pneumatic Lockout isolates potentially hazardous energy without costly tool modifications or inconvenient in-line valves.
• Material - Poly Propylene.
• Holes for Chord - One hole of 25 mm diameter on both sides.
• Locking Slots - 4 holes to latch with lock for group isolation.
• Complete Outer Size - Length - 194 mm and width 64 mm.
• Inner Size - Length 184 mm and width - 60 mm.
• Color - Red or can make any color as per volume required.
• Weight - 290 gms

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM Large Plug Lockout isolates potentially hazardous energy without costly tool modifications or inconvenient in-line valves.
• Material - Polypropylene.
• Holes for Chord - One hole of 25 mm diameter on both sides.
• Locking Slots - 4 holes to latch with lock for group isolation.
• Complete Outer Size - Length - 194 mm and width 64 mm. Inner Size - Length 184 mm and width - 60 mm.
• Color - Red or can make any color as per volume required.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• This device is used to lockout electric plug and other electrical devices. It does not require an extra tool for fixing only latched by the padlock directly. KRM Universal Multi-device Lockout made by joining two parts designed for Plug or Chord Lockout. 
• Material – Poly Propylene with printed label
• KRM Universal Multi-Device Lockout made by joining two parts that are designed to be used on high and low-pressure gas cylinders and control the cylinder by locking the regulator attachment, also useful for plug or chord lockout
• Locking slots – One hole to place the Lock
• Upper plates – Two or Three slots are attached with round rivet
• Outer Size – diameter 88 mm (3.45”), length 155 mm (6.10”)
• Can lockout equipment of size – 3.4” Width x 6” Length
• Color – Yellow , Red Or any color make as per required quantity
• Weight – 120 gm

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM Dual Large Plug Chord isolates potentially hazardous pneumatic energy without costly tool modifications or inconvenient in-line valves.
• Material – Poly Propylene
• Holes for chord – One hole of different diameter on both sides
• Isolate Large Plugs of Size – diameter 118 mm, length – 250 mm
• Locking slots – 11 hole to latch with Lock for group isolation.
• Complete Outer Size – length 256 mm, width 124 mm
• Inner Size – length 250 mm, width 118 mm
• Color – Red Or any color make as per the quantity
• Weight – 380 gm

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Tags are basically used to provide identification and specify the type of fault in industrial area, it can also be fixed with cable tie with lockout devices, and Padlock written in different languages like English and Hindi etc. as per the requirement in different dimensions.
• Made of Polyester/Plastic that is re-writable.
• Thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times.
• Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device.
• Two color printing or as per requirement which is resistant to water and oil.
• To hang the tags eye lid is provided which also prevents it from any damage and tear.
• The diameter of hole (eye lid) is 9 mm Size – 76mm x 138mm

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Tags are basically used to provide identification and specify the type of fault in industrial area, it can also be fixed with cable tie with lockout devices, and Padlock written in different languages like English and Hindi etc. as per the requirement in different dimensions.
• Made of Polyester/Plastic that is re-writable.
• thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times.
• Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device.
• Two color printing or as per requirement which is resistant to water and oil.
• To hang the tags eye lid is provided which also prevents it from any damage and tear.
• The diameter of hole (eye lid) is 9 mm Size – 76 mm x 120 mm

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Tags are basically used to provide identification and specify the type of fault in industrial area, it can also be fixed with cable tie with lockout devices, and Padlock written in different languages like English and Hindi etc. as per the requirement in different dimensions.
• Made of Polyester/Plastic that is re-writable.
• thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times.
• Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device.
• Two color printing or as per requirement which is resistant to water and oil.
• To hang the tags eye lid is provided which also prevents it from any damage and tear.
• The diameter of hole (eye lid) is 9 mm Size – 76 mm x 120 mm

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Tags are basically used to provide identification and specify the type of fault in industrial area, it can also be fixed with cable tie with lockout devices, and Padlock written in different languages like English and Hindi etc. as per the requirement in different dimensions.
• Made of Polyester/Plastic that is re-writable.
• thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times.
• Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device.
• Two color printing or as per requirement which is resistant to water and oil.
• To hang the tags eye lid is provided which also prevents it from any damage and tear.
• The diameter of hole (eye lid) is 9 mm Size – 76 mm x 138 mm

Tags are basically used to provide identification and specify the type of fault in industrial area, it can also be fixed with cable tie with lockout devices, and Padlock written in different languages like English and Hindi etc. as per the requirement in different dimensions.

• Made of Polyester/Plastic that is re-writable.
• thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times.
• Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device.
• Two color printing or as per requirement which is resistant to water and oil.
• To hang the tags eye lid is provided which also prevents it from any damage and tear.
• The diameter of hole (eye lid) is 9 mm Size – 76 mm x 138 mm

Tags are basically used to provide identification and specify the type of fault in industrial area, it can also be fixed with cable tie with lockout devices, and Padlock written in different languages like English and Hindi etc. as per the requirement in different dimensions. Made of Polyester/Plastic that is re-writable of thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times. Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device. Two color printing or as per requirement which is resistant to water and oil. To hang the tags eye lid is provided which also prevents it from any damage and tear. The diameter of hole (eye lid) is 9 mm Size – 76 mm x 138 mm

Tags are basically used to provide identification and specify the type of fault in industrial area, it can also be fixed with cable tie with lockout devices, and Padlock written in different languages like English and Hindi etc. as per the requirement in different dimensions. Made of Polyester/Plastic that is re-writable of thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times. Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device. Two color printing or as per requirement which is resistant to water and oil. To hang the tags eye lid is provided which also prevents it from any damage and tear. The diameter of hole (eye lid) is 9 mm Size – 76 mm x 138 mm