Search results for: 'KRM-K-RMCLT-6CL'

• Material - Engineering grade material
• outer size Dia: 31mm; Height: 20mm
• Inner size  Dia : 24mm; Height: 18mm
• Installation hole  dia -16mm
• without Locking arrangement
• This round device to used as collar for specify for equipment , switch,
• NOTE:-Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be paid by the buyer always.

• Material – Engineering grade material
• Front side Clear Fascia.
• Size in mm – 408 X 338
• Provision of pre drilled hole on back side to mount any surface.
• With 12 ABS hooks to hang padlock /  LOTO items.
• Max-3 lock can put / hang on one hook as required
• Molded handle on the top  for carry purpose
• Weight-2.3kg
• NOTE:-Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be paid by the buyer always.

• Material - Suggestion Box made of Mild Steel with duly Phosphate powder coated.
• Size-225mmx175mmx100mm.
• Resistant to corrosion.
• With Locking Mechanism for the box. And cut on top to insert any kind of slip or form easily into the box.
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

• Material  Made of Silicon.
• Useful in  Emergency Respiratory

• INSTRUCTION FOR USE
• Clear out the throat first.
• Tilt head back.
• Fit mask firmly on the face.
• Squeeze the ball.
• Watch the chest. It should rise and fall smoothly.
• If the chest does not rise and fall smoothly, there may be blockage in the victim’s  throat. The tongue has obstruct the airway. 

    OR

• There could be excessive leakage around the mask. Hold the mask tighter on the  face and squeeze it little faster.
• Clear any mucus from the throat every 3-4 minutes.
• Continue RESUSCITATION until the victim starts breathing naturally.

• Material: Natural rubber latex
• Powder-free, Fine grip, Non-tear, thick quality.
• Protecting public health & keeps you stay away from bacteria and germs spreading around.
• Single Use and Disposable.
• Color: White

Pack of 10 face shield without safety mask

Features :

• Broad Headband for support on forehead
• Elastic band/strap at the back for support for forehead
• Foam support for forehead
• Stretch headband to fit bigger head sizes

These items do not guarantee any protection from COVID-19 & any other disease. These are general safety items for personal protection.

These items do not guarantee any protection from COVID-19 & any other disease. These are general 

safety items

These items do not guarantee any protection from COVID-19 & any other disease. These are general 

safety items

These items do not guarantee any protection from COVID-19 & any other disease. These are general  safety items

• Hypoallergenic
• Very Low Resistance To Breathing
• Nose Bar Adaptable
• High Filtration Capacity
• Ultrasonic Welding

Feature : 

1. Anti-bacterial, dust, particle, pollen, droplet etc.
2. Made of hypoallergenic non-woven material.
3. Soft ear loops eliminates facial irritation.
4. Full length wire pin.

Instructions on use:

1. Make sure there are no tear or holes on either side of the mask before using.
2. Better be used once and then dispose in the trash.
3. Remove and replace mask when they become moist.
4. Clear your hands before us.

How to put it on:

1. Hold the mask by the ear loops. Place a loop around each ear.
2. Mold the nose piece to the shape of your nose.
3. Pull the bottom of the mask over your mouth and chin.

Instruction on storage:

1. Store in dry and clean environment.
2. Avoid high temperature and direct sunlight.

Delivery Depend Upon Qty , Normal 4-7 Days | Fright Extra , Tax Extra , Custom Extra

• Tag holder is made up of ABS material. Holder is applicable for every place where there is a need for instruction to be safe away from the place i.e. like Construction Provision to insert a Scaffold tag with the instruction. 
• Overall Size - 300 mm x 85 mm Provision of Round Cut out to hang the tag holder on any surface.
• Measurement of Cut out Dia - 55 mm x 59 mm With provision of the three holes of different dimension to tie the tag holder on any surface. Measurement of the round hole dia - 7.5 mm Measurement of the slit - 9.5 mm x 4.5 mm Text on the tag holder - Standard Text can be customized according to the requirement on the basis of the quantity required. 
• Size of Insert which can be used in tag holder  - 76 mm x 185.5 mm Weight -  60 gms (approx) Color - Whitish as per standard tag holder
• TAG HOLDER-25pcs
• TAG -25pcs

• SPECIFICATIONS:-
• Material - PP (polypropylene) plastic，
• Tightening type locking structure PRINTING AREA – 33/20 MM
• FLAT AREA – 40 MM
• TOTAL SEAL LENGTH -350 MM
• Color - Red, yellow, black , blue , green,
• Standard packing：100pcs/bag or 5000pcs/ctn

• SPECIFICATIONS:-
• Material - PP (polypropylene) plastic，
• Tightening type locking structure PRINTING AREA – 33/20 MM
• FLAT AREA – 40 MM
• TOTAL SEAL LENGTH -350 MM
• Color - Red, yellow, black , blue , green,
• Standard packing：100pcs/bag or 5000pcs/ctn