Electrical Panel Lockout Boxes

• Material – Strong Polycarbonate body
• Multipurpose  Electrical Panel Lockout is used for air Circuit Breaker or push button which is made by two section . To install the device primarily is switched off from the Source then fix and lock it by the help of safety padlocks.
• Available with or without metallic chain of 100 mm Length to Provide better locking
• For locking arrangement one hole of 9 mm is provide.
• Lower part outer size – 82.mm x 82.5 mm
• Lower part internal cutout dia – 40.5mm
• Upper part outer size  - 65mm
• Upper part outer dia – 57mm
• No of Hole – 2 Holes for Lockout
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material – Strong Polycarbonate body. Large Electric Panel Lockout device is combination of two parts- lower part square shape with provision of 4holes & super strong adhesive tape, upper parts in round shape.
• Two holes are provided for group locking purpose.
• Outer square base - 95 mm X 95 mm with inner round diameter 78 mm.
• Upper Round Size - Internal diameter 80 mm and depth 65 mm.
• Color – Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electrical Panel lockout is used to lock nearly all electrical panel switches and covers that are installed with exposed screws threaded into the panel back-box. Preventing the panel so that by mistake no one operates the panel.
• Material - ABS base with steel or Flexible Plastic strip. 
• Electrical Handle Lockout for electrical panel is made of four parts which is used to block the movement of handles and lever installed at electric panel, is available with or without lock.
• Locking Slot - Two holes or strong adhesive at base part so that it can be stick solidly within some hour and also can be screwed for tight sticking on oily surface and then locked by the padlock.
• Size of Base - Diameter is 59 mm, thickness 10 mm and
•  size of SLOTTER part is 25 mm x 18 mm x 7 mm. Steel / Plastic grip with edge to edge length is 435 mm, width 19 mm, with multiple holes of 9 mm for group isolation purpose.
• Weight - 40 gms for steel strip without brass padlock, 30 gms of plastic strip without brass padlock.
• Color - Yellow, Red Base with metal or plastic strip.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material – Mild Stainless Steel with powder coating and a transparent acrylic sheet.
• Electrical panel lockout – Multi device is available with locking arrangement  to prevent the accident arises due to hazardous situation, it can also be made in any other customize size as per the necessity.
• Outer base size - 139 mm.
• Inner base size - 109 mm.
• Cut Out size – 34 mm x 47 mm.
• Accessible by strong double sided tape for fixing it intensely having one latch for locking.
• Color – Grey, yellow, red or any color as per quantity required.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material – Mild Stainless Steel with powder coating and a transparent acrylic sheet.
• Electrical panel lockout – Multi device is available with locking arrangement  to prevent the accident arises due to hazardous situation, it can also be made in any other customize size as per the necessity.
• Outer base size - 139 mm.
• Inner base size - 109 mm.
• Cut Out size – 34mm x 47mm.
• Accessible by strong double sided tape for fixing it intensely having one latch for locking.
• Color – Grey, yellow, red or any color as per quantity required.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Strong Polycarbonate body electrical panel lockout multi devices is suitable for almost all the square lock switches and can be install by pressing and fixing with screw.
• Two holes for locking is provided and provision of hole in base part is also available.
• Outer square base – 66 mm X 66 mm.
• Inner Square Base – 45 mm x 45 mm.
• Upper Part of  Internal Size – 53 mm x 53 mm.
• Depth – 60 mm.
• Color – Transparent glass.
• Electrical Panel Lockout with chain

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Made of ABS material. Magnetic base.
• Can be fixed on any plain metallic surface.
• On Requirement text can be customized on quantity basis.
• Weight 10gms each.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Made of ABS material. Magnetic base. Can be fixed on any plain metallic surface. On Requirement text can be customized on quantity basis. Weight 10gms each.

• Material - ABS base with steel or Flexible Plastic strip. Electrical Handle Lockout for electrical panel is made of four parts which is used to block the movement of handles and lever installed at electric panel, is available with or without lock.
• Locking Slot - Two holes or strong adhesive at base part so that it can be stick solidly within some hour and also can be screwed for tight sticking on oily surface and then locked by the padlock.
• Size of Base - Diameter is 59 mm, thickness 10 mm and size of SLOTTER part is 25 mm x 18 mm x 7 mm. Steel / Plastic grip with edge to edge length is 435 mm, width 19 mm, with multiple holes of 9 mm for group isolation purpose.
• Weight - 40 gms for steel strip without brass padlock, 30 gms of plastic strip without brass padlock.
• Color - Yellow, Red Base with metal or plastic strip.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material- ABS
• Magnetic base.
• Can be fixed on any plain metallic surface.
• On Requirement text can be customized on quantity basis.
• Weight -10gms each

• Made of ABS material. Magnetic base. Can be fixed on any plain metallic surface. On Requirement text can be customized on quantity basis.
• Weight 10gms each.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com