Lockout Station/Cabinet
Subscribe to RSS Feed-
Lockout Key Station-without materialSpecial Price $103.51 was $115.01Made from mild steel with duly phosphate powder coated. Resistant to corrosion. Front side Clear Fascia with border frame. Size - 18" x 15" x 2" Provision of metal hook slots to hang key rings. 12 hooks in each slot to hang key rings. Provision of four pre drilled hole on back side of box to mount on any surface. Color - Grey or as per the quantity required. Weight - 3 kgs Learn More
-
KRM LOTO – DUAL LAYER LOCKOUT KEY STATION-3 Opaque fascia-18156 WITHOUT MATERIALSpecial Price $178.86 was $198.73
- Material- Mild steel with duly phosphate powder coated.
- Resistant to corrosion.
- Size – 18" X 15" X 6"
- Provision of pre drilled hole on back side to mount any other surface.
- Metal J Type hook / slots to hang keys in the station.
- Metal J hook - 17 nos.in one layer
- Can also make combination of 7/12/17 hook as per requirement
- Can hang Multiple key chain on one hook if require
- Dual layer of the station provides the extra advantage of the storage.
- One in-built Lock and a knob to hold.
- Weight – + 8.5 kg
- Color – Grey or as per quantity required.
- Three Metal J Type hook/slots on each side of station to hang key rings.
- KRM-K-DPKS-3 = 3+3+3+3 = 12 Layers
- Total separate key capacity - 204
- NOTE : PADLOCKS CAN ALSO HANG ON ALTERNATE HOOKS
- Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.
-
KRM LOTO – LOCKOUT TAGOUT PADLOCK STATION WITHOUT MATERIALSpecial Price $152.03 was $168.92
- Material – Made of 3 mm thick ACP (Aluminium Composite Panel) sheet.
- Size – 21" x 24“ inch.
- 38 ABS hooks that can be used for hanging different LOTO products..
- Can hang 2 padlocks in a single hook.
- Four ABS tag holder pocket to place tags and other LOTO items.
- Provision of four pre drilled holes on back to mount it on any surface.
- Can be used at any temperature low or high.
- Weight – 3.5kgs
- Color - Yellow or as per the quantity required.
- Freight will be charged on the basis of actual or volumetric weight whichever will be higher.
Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.
For Bulk Orders
Contact: +91 9810 291 381
E-mail: info@krmcorporation.com, krm@krmcorporation.com
Learn More -
KRM LOTO - LOCKOUT TAGOUT PADLOCK CENTER/STATION (WITHOUT MATERIAL)Special Price $109.20 was $121.80
- Material – Made of 3 mm thick ACP (Aluminium Composite Panel) sheet.
- Size – 18” x 21”
- With 22 ABS hooks to hang different LOTO items.
- Can hang 2 locks in a single loop as shown in the image for reference.
- Four ABS tag holder pocket to place tags and other LOTO items.
- Provision of four pre drilled holes on back to mount it on any surface.
- Can be used at any temperature low or high.
- Weight – 3kgs.
- Color – Yellow or as per the quantity required.
- Freight will be charged on the basis of actual or volumetric weight whichever will be higher.
- NOTE: - Customized Design according to the requirement can be made with different pockets and slotter.
Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.
For Bulk Orders
Contact: +91 9810 291 381
E-mail: info@krmcorporation.com, krm@krmcorporation.com
Learn More -
KRM LOTO - LOCKOUT TAGOUT STATION - WITHOUT MATERIALSpecial Price $130.53 was $145.03
- Material – Mild steel with duly phosphate powder coated.
- Resistant to corrosion.
- Front side Clear Fascia with border frame.
- Size – 30" X 15" X 2“
- Having provision of slots on the top layer to drop key or document after locking.
- Provision of pre drilled hole on back side to mount any other surface.
- Five or Six layer of Metal J Type Hooks slotter to keep LOTO items.
- Metal J hook - 9 nos. for padlocks or 17 nos. for key chain in one layer as per requirement. Can make combination of 9 or 17 hook.
- Two in-built Lock to provide support and a knob to hold.
- Weight – 10 kgs
- Color – Yellow or as per quantity required.
- Note – Can add combination of hooks and slotter if required
- Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.
-
KRM LOTO - LOCKOUT TAGOUT STATION - WITHOUT MATERIALSpecial Price $130.53 was $145.03
- Material – Mild steel with duly phosphate powder coated.
- Resistant to corrosion.
- Front side Clear Fascia with border frame.
- Size – 30" X 15" X 2“
- Having provision of slots on the top layer to drop key or document after locking.
- Provision of pre drilled hole on back side to mount any other surface.
- Five or six layer of ABS slotter to keep LOTO items, can hang 15 locks in a single layer.
- Two in-built Lock to provide support and a knob to hold.
- Weight – 10 kgs
- Color – Yellow or as per quantity required.
- Note – Can add combination of hooks and slotter if required
- Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer,would be payed by the buyer always.
-
KRM LOTO – OSHA LOCKABLE LOCKOUT TAGOUT STATION WITH MATERIALSpecial Price $180.74 was $200.82
- 1.KRM-K-LTSL,Lockable Lockout Station - Size : 375 mm X 375 mm X92.5mm NO-1
- 2.KRM-K-OSLTP-C-MDK,OSHA Safety Lock Tag Padlocks / Locks - With differ key - 38 mm Height - Metal Shackle - with curve at top No-5
- 3.KRM-K-MTH,KRM LOTO Multipurpose TAG HOLDER,NO-2
- 4.KRM-K-VCH-R-S25,Vinyl Molded coated Hasp-Small - jaw dia. -25 mm – RED,NO-2
- 5.KRM-K-VCH-R-P38/39,Vinyl Molded coated Hasp - Premier -jaw dia. -38/39mm-RED,NO-1
- 6.KRM-K-LT#10300,Do Not Operate Tags - Lockout Tags - 2colors,NO-20
Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always
For Bulk Orders
Contact: +91 9810 291 381
E-mail: info@krmcorporation.com, krm@krmcorporation.com
Learn More -
KRM LOTO – LOCKABLE LOCKOUT TAGOUT PADLOCK STATION-RED-24152 (WITHOUT MATERIAL)Special Price $116.99 was $129.99
- Material – Mild steel with duly phosphate powder coated.
- Front side Clear Fascia with border frame.
- Size – 24”X 15” X 2”
- Provision of pre drilled hole on back side to mount any other surface.
- Metal J Type hook / slots to hang padlocks in the station.
- 5 Metal J Type hook layer – 17 nos.in one layer, lock can place /hang after keep blank one j hook and can hang key / key chain ring in that blank hook.
- 9 padlock can hang individually in one metal layer of 17 hooks.
- 2 lock can put / hag on one hook as per requirement
- One /Two in-built Locks and a knob to hold.
- Weight – +5.5 kg
- Colour – Red or as per quantity required.
- KRM-K-LLTPS-24152-R =5 Layers 17no’s Metal j hook (45 Padlock can Hang )
- Note -Can also make combination of metal j hook 7/12/17 as per requirement.
- NOTE:-Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be paid by the buyer always.
-
KRM LOTO – LOCKABLE LOCKOUT TAGOUT KEY STATION-RED-24152Special Price $116.99 was $129.99
-
KRM LOTO – LOCKABLE LOCKOUT TAGOUT PADLOCK STATION - MESH FASCIA-30152Special Price $139.18 was $154.64
- Material – Mild steel with duly phosphate powder coated.
- Front side Mesh Fascia with border frame.
- Size – 30" X 15" X 2"
- Provision of pre drilled hole on back side to mount any other surface.
- Metal J Type hook / slots to hang padlocks in the station.
- 6 Metal J Type hook layer – 17 nos.in one layer, lock can place /hang after keep blank one j hook and can hang key / key chain ring in that blank hook.
- 9 padlock can hang individually in one metal layer of 17 hooks.
- 2 lock can put / hag on one hook as per requirement
- One / Two in-built Lock and a knob to hold.
- Weight – +5.5 kg
- Colour – Yellow or as per quantity required.
- KRM-K-LLTPS- MF-30152= 6 Layers 17no’s Metal j hook (54 Padlock can Hang )
- Note -Can also make combination of metal j hook 7/12/17 as per requirement.
- NOTE:-Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be paid by the buyer always.
-
KRM LOTO – LOCKOUT KEY STATION 5– Opaque fascia-18152 WITHOUT MATERIALSpecial Price $141.75 was $157.50
- Material- Mild steel with duly phosphate powder coated.
- Resistant to corrosion.
- Size – 18" X 15" X 2"
- Provision of pre drilled hole on back side to mount any other surface.
- Metal J Type hook / slots to hang keys in the station.
- Metal J hook - 17 nos.in one layer
- Can also make combination of 7/12/17 hook as per requirement
- Can hang Multiple key chain on one hook if require
- One in-built Lock and a knob to hold.
- Weight – +4.5 kg
- Color – Grey or as per quantity required.
- NOTE : - Five + Five Metal J Type hook / slots on each side of station to hang key rings.
- KRM-K-MKC-5C= 5+5=10 Layers
- Total separate key hooks capacity - 170
- NOTE:-Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be paid by the buyer always.
-
KRM LOTO – LOCKABLE LOCKOUT TAGOUT PADLOCK STATION-CLEAR FASCIA -30156Special Price $152.03 was $168.92
- Material – Mild steel with duly phosphate powder coated.
- Front side Clear Fascia with border frame.
- Size – 30" X 15" X 6"
- Provision of pre drilled hole on back side to mount any other surface.
- Metal J Type hook / slots to hang padlocks in the station.
- 6 Layers of Metal J Type hook (1 layer having 17 no’s hook). One lock & key/key chain separately can place /hang on alternate hook.
- 9 padlock can hang individually in one metal layer of 17 hooks.
- 2 lock can put / hag on one hook as per requirement
- One adjustable shelf
- One / two in-built Lock and a knob to hold.
- Weight – +10 kg
- Color – Yellow or as per quantity required.
- KRM-K-LLTPS-CF-30156 =6 Layers of Metal j hook(54 Padlock can Hang )
- Note -Can also make combination of metal j hook 7/12/17 as per requirement.
-
KRM LOTO – LOCKABLE LOCKOUT TAGOUT PADLOCK STATION-CLEAR FASCIA -30156 (WITHOUT MATERIAL))Special Price $195.30 was $216.30
- Material – Mild steel with duly phosphate powder coated.
- Front side Clear Fascia with border frame.
- Size – 30" X 15" X 6"
- Provision of pre drilled hole on back side to mount any other surface.
- Metal J Type hook / slots to hang padlocks in the station.
- 6 Layers of Metal J Type hook -1 layer having 17no’s hooks and other layer having 7 no’s hook. One lock & key/key chain separately can place /hang on alternate hook
- 9, 4 padlock can hang individually in one metal layer of 17 & 7 hooks in combination of Front and both left & right side.
- 2 lock can put / hag on one hook as per requirement
- One adjustable shelf
- One / Two in-built Lock and a knob to hold.
- Weight – +12 kg
- Colour – Yellow or as per quantity required.
- KRM-K-LLTPS-CF-102P-30156=6 Layers 17no’s and 6+6 Layer-7no’s Metal j hook (102 Padlock can Hang )
- Note -Can also make combination of metal j hook 7/12/17 as per requirement.
-
KRM LOTO – LOCKABLE LOCKOUT TAGOUT KEY STATION CLEAR FASCIA 30156 (without material)Special Price $195.30 was $216.30
- Material – Mild steel with duly phosphate powder coated.
- Resistant to corrosion.
- Front side Clear Fascia with border frame.
- Size – 30" X 15" X 6"
- Provision of pre drilled hole on back side to mount any other surface.
- Metal J Type hook to hang keys in the station.
- 17 & 7 hooks individually in one metal layer with combination of Front & both left & right side.
- Can also make combination of 7/12/17 hook as per requirement
- Can hang Multiple key chain on one hook if require
- One/two in-built Lock and a knob to hold.
- Color – Yellow or as per quantity required.
- KRM-K-LLTKS-CF217-30156=7 Layers 17 no’s and 7+7 Layer-7no’s Metal J Hook(Total separate key capacity – 217)
- KRM-K-LLTKS-CF248-30156 =8 Layers 17 No’s and 8+8 Layer -7 no’s Metal J Hook (Total separate key capacity - 248)
- KRM-K-LLTKS-CF279-30156 =9 Layers 17 No’s and 9+9 Layer -7 no’ Metal J Hook (Total separate key capacity – 279
-
KRM LOTO – DUAL LAYER LOCKOUT KEY STATION-34 Opaque fascia-18156 without materialSpecial Price $178.87 was $198.73
- Material- Mild steel with duly phosphate powder coated.
- Resistant to corrosion.
- Size – 18" X 15" X 6"
- Provision of pre drilled hole on back side to mount any other surface.
- Metal J Type hook / slots to hang keys in the station.
- Metal J hook – (1Layer having 17 no’s hooks) and inner movable layer having 12no’s hook.
- Can also make combination of 7/12/17 hook as per requirement
- Can hang Multiple key chain on one hook if require
- Dual layer of the station provides the extra advantage of the storage.
- One in-built Lock and a knob to hold.
- Weight – +9.5 kg
- Color – Grey or as per quantity required.
- Five Metal J Type hook /slots on each side of station to hang key rings.
- KRM-K-DLLKS-34 = 3+4+4+4 = 15 Layers
- Total separate key capacity – 215
- NOTE : PADLOCKS CAN ALSO HANG ON ALTERNATE HOOKS
Log In
Create New Account