PARKING AND ROAD SAFETY

Electrical Arc Flash Protective Apparel,

complete Kit from 8Cal to 100Cal/cm2 containing ARC Switching Suit (Jacket and Trousers) Arc Switching Hood Dielectric Hard Hat Arc Visor,Chin Guard Cap Bracket Kit -Arc latex gloves, Complete kit in standard bag

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Electrical Arc Flash Protective Apparel, complete Kit from 20Cal to 100Cal/cm2 containing ARC Switching Suit (Jacket and Trousers) Arc Switching Hood Dielectric Hard Hat Arc Visor,Chin Guard Cap Bracket Kit -Arc latex gloves, Complete kit in standard bag

• Seamless Electrical Gloves. Made from Latex Rubber. Optimal strength. Soft and flexible. Excellent finishing Shock Proof Gloves Used in high voltage works
• Storage-
• Gloves should not be exposed to direct sunlight or other sources of ozone, it is desirable that the ambient storage temperature should not exceed 35 degree Celsius.
• Issue-
• Gloves intended for electrical line workers should be issued in a protective container , free from grease and oil. Gloves issued for emergency use only should be kept in waterproof containers.

• Seamless Electrical Gloves. Made from Latex Rubber. Optimal strength. Soft and flexible. Excellent finishing Shock Proof Gloves Used in high voltage works
• Storage-
• Gloves should not be exposed to direct sunlight or other sources of ozone, it is desirable that the ambient storage temperature should not exceed 35 degree Celsius.
• Issue-
• Gloves intended for electrical line workers should be issued in a protective container , free from grease and oil. Gloves issued for emergency use only should be kept in waterproof containers.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

Powerful Halogen / LED combo hands free light certified product. The body is tough ABS resin that's corrosion proof and resistant to extreme temperatures. The 90° pivoting head allows you to aim light right where you need it. The light weight battery pack houses 4 AA alkaline cells (included) Can fix it on helmet or can directly wear it on head.

Powerful flashlight was designed with onething in mind: SAFETY. It carries moreapprovals than any other flashlight on themarket today, making it safe for any hazardousenvironment or condition. It is o ringsealed with a twist-on shroud and comes with apolarity battery guard tray that safeguardsagainst dangerous "outgassing" of hydrogenfrom an accidentally reversed cell. It is poweredby 3 C alkaline cells, submersible to 500 feet, andhas an ABS resin body which resists chemicals,corrosion, and extreme temperatures. Unlikeordinary flashlights that produce a yellow beam,the Sabre Lite's incredibly bright Xenon lampproduces a powerful collimated white beam.

HANDY, unbelievably bright LEDflashlight that's powered by 3 AAAAalkaline cells (included). The light weight,slim profile design fits neatly in yourpocket and comfortably in your hand. Atail button switch provides quick on/offor momentary activation. The clip isvirtually unbreakable because it ismolded to the Xenon body as one unit. And because it is molded out ofpolycarbonate resin, it won't cause sparksand is safe to use in electricalenvironments. Length -15.7 cm. Batteryburn time : 50hours

• Pin Type Circuit Breaker Lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. Can be used for two, three or four pole circuit breaker, required no tools for installation and available as Pin In, pin Out and wide type.
• Material - Nylon with metallic PIN.
• KRM MCB Lockout molded pin type is suitable for single, double, triple and four pole circuit breaker, it is easy to use and offer a flawless lockout solution, with the pin having high tensile steel grade strength.
• Color - Green, Blue, Yellow, Red or any color as per any color as per volume.
• Dimension - Outer size - 63.3 mm length, 23.3 mm width, 14 mm.
• Weight - 15 gm each.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Pin Type Circuit Breaker Lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. Can be used for two, three or four pole circuit breaker, required no tools for installation and available as Pin In, pin Out and wide type.
• Material - Nylon with metallic PIN.
• KRM MCB Lockout molded pin type is suitable for single, double, triple and four pole circuit breaker, it is easy to use and offer a flawless lockout solution, with the pin having high tensile steel grade strength.
• Color - Green, Blue, Yellow, Red or any color as per any color as per volume.
• Dimension - Outer size - 63.3 mm length, 23.3 mm width, 14 mm.
• Weight - 15gm each.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Pin Type Circuit Breaker Lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. Can be used for two, three or four pole circuit breaker, required no tools for installation and available as Pin In, pin Out and wide type.
• Material - Nylon with metallic PIN.
• KRM MCB Lockout molded pin type is suitable for single, double, triple and four pole circuit breaker, it is easy to use and offer a flawless lockout solution, with the pin having high tensile steel grade strength.
• Color - Green, Blue, Yellow, Red or any color as per any color as per volume.
• Dimension - Outer size - 63.3 mm length, 23.3 mm width, 14 mm.
• Weight - 15 gm each.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Pin Type Circuit Breaker Lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. Can be used for two, three or four pole circuit breaker, required no tools for installation and available as Pin In, pin Out and wide type.
• Material - Nylon with metallic pin.
• KRM MCB Lockout molded pin type is suitable for single, double, triple and four pole circuit breaker, it is easy to use and offer a flawless lockout solution, with the pin having high tensile steel grade strength.
• Color - Red, Blue, Green, Yellow or any color as per volume.
• Dimension - Outer size 63.3 mm length, 23.3 mm width, 14 mm height.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Pin Type Circuit Breaker Lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. Can be used for two, three or four pole circuit breaker, required no tools for installation and available as Pin In, pin Out and wide type.
• Material - Nylon with metallic pin.
• KRM MCB Lockout molded pin type is suitable for single, double, triple and four pole circuit breaker, it is easy to use and offer a flawless lockout solution, with the pin having high tensile steel grade strength.
• Color – Yellow, Blue, Red, or Green any color as per volume.
• Dimension - Outer size 63.3 mm length, 23.3 mm width, 14 mm height.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com