PARKING AND ROAD SAFETY

---

---

• Pin Type Circuit Breaker Lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. Can be used for two, three or four pole circuit breaker, required no tools for installation and available as Pin In, pin Out and wide type.
• Material - Nylon with metallic pin.
• KRM MCB Lockout molded pin type is suitable for single, double, triple and four pole circuit breaker, it is easy to use and offer a flawless lockout solution, with the pin having high tensile steel grade strength.
• Color – Green, Blue, Red, Yellow or any color as per volume.
• Dimension - Outer size 63.3 mm length, 23.3 mm width, 14 mm height.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Pin Type Circuit Breaker Lockout device is used to provide locking to the miniature circuit breaker that is with appropriate small holes, squeeze from the back to open the jaws of the lockout device and then fix or lock it properly in the small hole of the MCB. Can be used for two, three or four pole circuit breaker, required no tools for installation and available as Pin In, pin Out and wide type.
• Material - Nylon with metallic pin.
• KRM MCB Lockout molded pin type is suitable for single, double, triple and four pole circuit breaker, it is easy to use and offer a flawless lockout solution, with the pin having high tensile steel grade strength.
• Color - Blue, Red, Green, Yellow or any color as per volume.
• Dimension - Outer size 63.3 mm length, 23.3 mm width, 14 mm height

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Material – Nylon, ABS/PP Metallic PIN and Spring
• KRM Pin In Circuit Breaker Lockout is applicable on the circuit breakers for energy isolation, always used when energy source is in switched OFF condition.
• The device can be installed directly without the assistance of any extra tool, having high tensile strength and is suitable for single, double, triple and four pole circuit breaker.
• Length of Pin can be expanded up to 8.5 mm on pressing the back side with the help of thumb.
• Color – Green Black, Red Black, Yellow Black, Blue Black standard options are available or we can customized as per the quantity required.
• Dimension – Height 43 mm, Width 24 mm Depth 24 mm

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Material - ABS Body with metallic screw.
• Large Circuit Breaker Lockout device with or without round arrangement at the back having molded teeth for strong gripping. In round large circuit breaker lockout device the bolt is attached with round portion and in simple device with round portion and in simple device with round we can tighten the screw with the help of screw driver.
• Screw Type - Plain or folding screw for simple device and then adjust the round for tightening screw in round lockout device.
• single hole and one rectangle for isolate large MCB Toggle Grip of circuit breaker.
• It is suitable for 227V & above Circuit breakers.
• Dimensions – Height - 94mm, Width - 49mm, Inner Width - 75mm, Inner Height - 20mm hole diameter 8mm.
• Weight – 36 gm
• Color - Standard color red or it can make as per the quantity required quantity.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Material - ABS Body with metallic screw.
• Large Circuit Breaker Lockout device with or without round arrangement at the back having molded teeth for strong gripping. In round large circuit breaker lockout device the bolt is attached with round portion and in simple device with round portion and in simple device with round we can tighten the screw with the help of screw driver.
• Screw Type - Plain or folding screw for simple device and then adjust the round for tightening screw in round lockout device.
• Twelve holes to place the padlock in round type and one rectangle for isolate large MCB Toggle Grip of circuit breaker.
• It is suitable for 227V & above Circuit breakers.
• Dimensions – Height - 94mm, Width - 49mm, Inner Width - 75mm, Inner Height - 20mm hole diameter 8mm.
• Weight – 67 gm
• Color - Standard color red or it can make as per the quantity required quantity.

Note - Price of the product involves the basic cost of the product,whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Material - ABS Body with metallic screw.
• Large Circuit Breaker Lockout device with or without round arrangement at the back having molded teeth for strong gripping. In round large circuit breaker lockout device the bolt is attached with round portion and in simple device with round portion and in simple device with round we can tighten the screw with the help of screw driver.
• Screw Type - Plain or folding screw for simple device and then adjust the round for tightening screw in round lockout device.
• single hole and one rectangle for isolate large MCB Toggle Grip of circuit breaker.
• It is suitable for 227V & above Circuit breakers.
• Dimensions – Height - 94mm, Width - 49mm, Inner Width - 75mm, Inner Height - 20mm hole diameter 8mm.
• Weight – 45 gm
• Color - Standard color red or it can make as per the quantity required quantity.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Material - ABS Body with metallic screw.
• Large Circuit Breaker Lockout device with or without round arrangement at the back having molded teeth for strong gripping. In round large circuit breaker lockout device the bolt is attached with round portion and in simple device with round portion and in simple device with round we can tighten the screw with the help of screw driver.
• Screw Type - Plain or folding screw for simple device and then adjust the round for tightening screw in round lockout device.
• single hole and one rectangle for isolate large MCB Toggle Grip of circuit breaker.
• It is suitable for 227V & above Circuit breakers.
• Dimensions – Height - 94mm, Width - 49mm, Inner Width - 75mm, Inner Height - 20mm hole diameter 8mm.
• Weight – 36 gm
• Color - Standard color red or it can make as per the quantity required quantity.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Material - ABS Body with metallic screw.
• Large Circuit Breaker Lockout device with or without round arrangement at the back having molded teeth for strong gripping. In round large circuit breaker lockout device the bolt is attached with round portion and in simple device with round portion and in simple device with round we can tighten the screw with the help of screw driver.
• Screw Type - Plain or folding screw for simple device and then adjust the round for tightening screw in round lockout device.
• single hole and one rectangle for isolate large MCB Toggle Grip of circuit breaker.
• It is suitable for 227V & above Circuit breakers.
• Dimensions – Height - 94mm, Width - 49mm, Inner Width - 75mm, Inner Height - 20mm hole diameter 8mm.
• Weight – 45 gm
• Color - Standard color red or it can make as per the quantity required quantity.

Note - Price of the product involves the basic cost of the product,whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Material - ABS Body with metallic screw.
• Large Circuit Breaker Lockout device with or without round arrangement at the back having molded teeth for strong gripping. In round large circuit breaker lockout device the bolt is attached with round portion and in simple device with round portion and in simple device with round we can tighten the screw with the help of screw driver.
• Screw Type - Plain or folding screw for simple device and then adjust the round for tightening screw in round lockout device.
• Twelve holes to place the padlock in round type and one rectangle for isolate large MCB Toggle Grip of circuit breaker.
• It is suitable for 227V & above Circuit breakers.
• Dimensions – Height - 94mm, Width - 49mm, Inner Width - 75mm, Inner Height - 20mm hole diameter 8mm.
• Weight – 67 gm
• Color - Standard color red or it can make as per the quantity required quantity.

Note - Price of the product involves the basic cost of the product,whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Emergency switch or push button lockout device is used to protect the emergency push button to prevent uncertain condition caused by human error.
• Material – Polypropylene material with identification label.
• KRM LOTO Mushroom Push button is designed to fits over the button and prevent it by accidental operation.
• Three holes are available for locking and tagging the device and no extra tool is required for installation.
• Outer Size – 80 mm X 40.5 mm.
• Inner size – 70 mm X 30.50 mm.
• Weight – 60 gms
• Color – Milky Transparent & Red.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Emergency switch or push button lockout device is used to protect the emergency push button to prevent uncertain condition caused by human error.
• Material – Polypropylene material with identification label.
• KRM LOTO Mushroom Push button is designed to fits over the button and prevent it by accidental operation.
• Three holes are available for locking and tagging the device and no extra tool is required for installation.
• Outer Size – 80 mm X 40.5 mm.
• Inner size – 70 mm X 30.50 mm.
• Weight – 60 gms
• Color – Milky Transparent & Red.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Emergency switch or push button lockout device is used to protect the emergency push button to prevent uncertain condition caused by human error.
• Material – Polypropylene material with identification label.
• KRM LOTO Mushroom Push button is designed to fits over the button and prevent it by accidental operation.
• Three holes are available for locking and tagging the device and no extra tool is required for installation.
• Outer Size – 80 mm X 40.5 mm.
• Inner size – 70 mm X 30.50 mm.
• Weight – 60 gms
• Color – Milky Transparent & Red.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

---

---

• Material – Strong Polycarbonate body
• KRM LOTO – Emergency Push Button Lockout is rotary and ideal to fix by pressing and screw on electrical switch button permanently and prevent worker by operating for a mistake, having two parts with detachable hinges
• Color - Transparent Glass.
• Outer height – In closed position 55 mm (± 10%)
• Internal size – Upper part Height 38 mm X Diameter 44 mm, lower base part Height 15 mm X Diameter 45.5 mm
• For KRM-K-TEPBL23-Cut out diameter size of lower base part 23.5 mm. It can also be extended up to 30 mm dia.
• With holes for locking purpose 7.5 mm.
• Weight - 30 gms.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Learn More

Tags are basically used to provide identification and specify the type of fault in industrial area, it can also be fixed with cable tie with lockout devices, and Padlock written in different languages like English and Hindi etc. as per the requirement in different dimensions. Made of Polyester/Plastic that is re-writable of thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times. Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device. Two color printing or as per requirement which is resistant to water and oil. To hang the tags eye lid is provided which also prevents it from any damage and tear. The diameter of hole (eye lid) is 9 mm Size – 76 mm x 138 mm Learn More

Tags are basically used to provide identification and specify the type of fault in industrial area, it can also be fixed with cable tie with lockout devices, and Padlock written in different languages like English and Hindi etc. as per the requirement in different dimensions. Made of Polyester/Plastic that is re-writable of thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times. Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device. Two color printing or as per requirement which is resistant to water and oil. To hang the tags eye lid is provided which also prevents it from any damage and tear. The diameter of hole (eye lid) is 9 mm Size – 76 mm x 138 mm

Learn More