PARKING AND ROAD SAFETY

• Scaffold (PVC) Tags basically indicate danger, caution and some other important points related to safety under construction area. Easily writable with marker and re-writable pen, free from dirt and easily readable.
• Material – Polyester/Plastic that is rewritable of thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times.
• Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device.
• Two color printing or as per requirement which is resistant to water and oil.
• To hang the tags eye lid is provided which also prevents it from any damage and tear.
• Size – 95mmX 203mm
• Cut out Dia – 55mm
• Weight – 10gm
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

Scaffold Tags are basically used to provide identification and specify the type of fault in industrial area, it can also be fixed with cable tie with lockout devices, and Padlock written in different languages like English and Hindi etc. as per the requirement in different dimensions. Material-Polyester/Plastic that is re-writable of thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times.  Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device. Two color printing or as per requirement which is resistant to water and oil. To hang the tags eye lid is provided which also prevents it from any damage and tear. Size - 96mmX 2mm .

• Scaffold (PVC) Tags basically indicate danger, caution and some other important points related to safety under construction area. Easily writable with marker and re-writable pen, free from dirt and easily readable.
• Material – Polyester/Plastic that is rewritable of thickness 0.3 mm - 0.5 mm (±10%) so can be re-used many times.
• Self-laminated Tags basically indicate danger, caution and some other important points related to the installed device.
• Two color printing or as per requirement which is resistant to water and oil.
• To hang the tags eye lid is provided which also prevents it from any damage and tear.
• Size – 95mmX 203mm
• Cut out Dia – 55mm
• Weight – 10gm
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

• Tag holder is made up of ABS material.
• Holder is applicable for every place where there is a need for instruction to be safe away from the place i.e. like Construction
• Provision to insert a Scaffold tag with the instruction.
• Overall Size – 300mm x 85mm
• Provision of Round Cut out to hang the tag holder on any surface
• Measurement of Cut out Dia – 55mm x 59mm
• With provision of the three holes of different dimension to tie the tag holder on any surface.
• Measurement of the round hole dia – 7.5mm
• Measurement of the slit – 9.5mm x 4.5mm
• Text on the tag holder – Standard
• Text can be customized according to the requirement on the basis of the quantity required.
• Size of Insert which can be used in tag holder - 76mm x 185.5mm
• Weight – 70gm (approx)
• Color – Whitish as per standard tag holder

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Tag holder is made up of ABS material.
• Holder is applicable for every place where there is a need for instruction to be safe away from the place i.e. like Construction
• Provision to insert a Scaffold tag with the instruction.
• Overall Size – 345mm x 90 mm
• Provision of Round Cut out to hang the tag holder on any surface
• Measurement of Cut out Dia – 55mm x 59mm
• With provision of the three holes of different dimension to tie the tag holder on any surface.
• Measurement of the round hole dia – 7.5mm
• Measurement of the slit – 9.5mm x 4.5mm
• Text on the tag holder – Standard
• Text can be customized according to the requirement on the basis of the quantity required.
• Size of Insert which can be used in tag holder – 83.5mm x 203mm
• Weight – 80gm (approx)
• Color – Whitish as per standard tag holder.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Tag holder is made up of ABS material.
• Holder is applicable for every place where there is a need for instruction to be safe away from the place i.e. like Construction
• Provision to insert a Scaffold tag with the instruction.
• Overall Size – 345mm x 90 mm
• Provision of Round Cut out to hang the tag holder on any surface
• Measurement of Cut out Dia – 55mm x 59mm
• With provision of the three holes of different dimension to tie the tag holder on any surface.
• Measurement of the round hole dia – 7.5mm
• Measurement of the slit – 9.5mm x 4.5mm
• Text on the tag holder – Standard
• Text can be customized according to the requirement on the basis of the quantity required.
• Size of Insert which can be used in tag holder – 83.5mm x 203mm
• Weight – 80gm (approx)
• Color – Whitish as per standard tag holder.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Butterfly valve lockout is used to lock hydraulic, pneumatic and chemical energies efficiently.
• Made of dielectric material and doesn’t effected by any chemical, low in cost with high performance.
• Material – Poly Propylene
• KRM LOTO ADJUSTABLE – Universal Butterfly Valve Lockout is used to block the valve lever with trigger.
• Body of lockout is divided in two parts, the butterfly valve lockout is a simple, effective way to secure your butterfly valves to prevent unauthorized operation working with low and High temperature variation – 45°C to 200°C.
• Recommended to use with cable Lockout device for stronger strength and lesser possibilities for accidents.
• Size Applicable – Suitable for 8 mm to 45 mm valves
• Color – Red Or any color make as per the required quantity
• Can be used with the combination of cable lockout as shown in image
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalog. Resistant to low and high temperature variation 45 degree Celsius to 200 degree Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene
• Dimension – Total Length of open/close position 180/114mm
• Hole Dia – 8.5mm
• Total 7 holes and maximum 2 hole for lockout
• Its specialty is that its very flexible lockout arrangement that fits on  valves of different dimensions, also very compact and easy carrying.
• Color - Red or any color make as per volume.
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Plug Valve Lockout is the main lockout device used to effortlessly and successfully secure a physically activated attachment valve with a stem width between 23 mm – 35 mm.
• The base of the lockout device can be set up once connected, and by and large does not meddle with valve actuation by torque or removable handle.
• Material - Poly Propylene
• Can be used at temperature at 31°C - 93°C.
• Adequately reasonable for the valves which are hard to lockout.
• Available in different sizes

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Plug Valve Lockout is the main lockout device used to effortlessly and successfully secure a physically activated attachment valve with a stem width between 23 mm – 35 mm.
• The base of the lockout device can be set up once connected, and by and large does not meddle with valve actuation by torque or removable handle.
• Material - Poly Propylene
• Can be used at temperature at 31°C - 93°C.
• Adequately reasonable for the valves which are hard to lockout.
• Available in different size
• Color - Red or any color make as per volume.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Plug Valve Lockout is the main lockout device used to effortlessly and successfully secure a physically activated attachment valve with a stem width between 23 mm – 35 mm.
• The base of the lockout device can be set up once connected, and by and large does not meddle with valve actuation by torque or removable handle.
• Material - Poly Propylene
• Can be used at temperature at 31°C - 93°C.
• Adequately reasonable for the valves which are hard to lockout.
• Available in different sizes
• Color - Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Plug Valve Lockout is the main lockout device used to effortlessly and successfully secure a physically activated attachment valve with a stem width between 23 mm – 35 mm.
• The base of the lockout device can be set up once connected, and by and large does not meddle with valve actuation by torque or removable handle.
• Material - Poly Propylene
• Can be used at temperature at 31°C - 93°C.
• Adequately reasonable for the valves which are hard to lockout.
• Available in different sizes.
• Color - Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Plug Valve Lockout is the main lockout device used to effortlessly and successfully secure a physically activated attachment valve with a stem width between 23 mm – 35 mm. 
• The base of the lockout device can be set up once connected, and by and large does not meddle with valve actuation by torque or removable handle. 
• Material - Poly Propylene
• Can be used at temperature at 31°C - 93°C.
• Adequately reasonable for the valves which are hard to lockout.
• Available in different sizes
• Color - Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Universal circuit Breaker lockout is a versatile device fits on wide range of single, double, triple and four pole of electrical circuit breaker can be accommodates up to one lock and with the help of hasp lockout device can be used for group isolation.
• Material High quality ABS
• KRM Universal Circuit Breaker Lockouts will lockout most type of breaker’s lever. One size fits in all type of circuit breakers having nose Or without nose for better gripping which is UV resistant and suitable for single, double, tripe and four pole circuit breaker can be locked with single padlock and lockout hasp.
• Color Red, Yellow, Green and Blue Or any color make as per the required quantity.
• Size length 56 mm, width 26 mm, thickness 19 mm, outer Thickness at locking end 11 mm, locking Hole diameter 9 mm, average Centre internal Grip 13.5 m
• Weight 18 gm

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Universal circuit Breaker lockout is a versatile device fits on wide range of single, double, triple and four pole of electrical circuit breaker can be accommodates up to one lock and with the help of hasp lockout device can be used for group isolation.
• Material – High quality ABS with metallic nut
• KRM Universal Circuit Breaker Lockouts will lockout most type of breaker’s lever. One size fits in all type of circuit breakers having nose Or without nose for better gripping which is UV resistant and suitable for single, double, triple and four pole circuit breaker can be locked with single padlock and lockout hasp.
• Specialty of this lockout is that folding screw is there so that no extra tool required for any assistance.
• Size – length 56 mm, width 26 mm, thickness 19 mm, outer Thickness at locking end 11 mm, locking Hole diameter 9 mm, average Centre internal Grip 13.5 m, Average center internal Grip 13.5 mm
• Color – Red, Yellow, Green and Blue Or any color make as per the required quantity.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com