Plug Power Chord Lockout

This device is used to lockout electric plug and other electrical devices. It does not require an extra tool for fixing only latched by the padlock directly. KRM Universal Multi-device Lockout made by joining two parts designed for Plug or Chord Lockout.

Material – Poly Propylene with printed label

KRM Universal Multi-Device Lockout made by joining two parts that are designed to be used on high and low-pressure gas cylinders and control the cylinder by locking the regulator attachment, also useful for plug or chord lockout

Locking slots – One hole to place the Lock

Upper plates – Two or Three slots are attached with round rivet

Outer Size – diameter 88 mm (3.45”), length 155 mm (6.10”)

Can lockout equipment of size – 3.4” width x 6” Length

Color – Yellow , Red Or any color make as per required quantity

Weight – 113 gm

KRM Dual Large Plug Chord isolates potentially hazardous pneumatic energy without costly tool modifications or inconvenient in-line valves.

Material – Poly Propylene

Holes for chord – One hole of different diameter on both sides

Isolate Large Plugs of Size – diameter 118 mm, length – 250 mm

Locking slots – 11 hole to latch with Lock for group isolation.

Complete Outer Size – length 256 mm, width 124 mm

Inner Size – length 250 mm, width 118 mm

Color – Yellow, Red Or any color make as per the quantity

Weight – 375 gm

KRM Mini Plug Chord construct in two parts that Completely encloses electrical plugs of mini size to prevent accidental reconnection.

Material – ABS with printed label

Locking slots – Three hole to place the Lock

Size – length 90 mm, width 50mm, diameter 25 mm excluding hinge and locking arrangement

Diameter for Power chord that is different for both side - One side 14 mm, Another side 19 mm

Color – Yellow , Red Or any color make as per required quantity

Weight – 50 gm

This device is used to lockout electric plug and other electrical devices. It does not require an extra tool for fixing only latched by the padlock directly. KRM Universal Multi-device Lockout made by joining two parts designed for Plug or Chord Lockout. Material – Poly Propylene with printed label

KRM Universal Multi-Device Lockout made by joining two parts that are designed to be used on high and low-pressure gas cylinders and control the cylinder by locking the regulator attachment, also useful for plug or chord lockout

Locking slots – One hole to place the Lock

Upper plates – Two or Three slots are attached with round rivet

Outer Size – diameter 88 mm (3.45”), length 155 mm (6.10”)

Can lockout equipment of size – 3.4” Width x 6” Length

Color – Yellow , Red Or any color make as per required quantity

Weight – 113 gm

KRM Adjustable Lockout Bag used for the plug, connector, hoist control button, lever, cylinder, pneumatic etc which is basically a hollow tube, PVC can be inserted and can make a tight lockout.

Material – Stainless Steel strip and fine fabric bag.

Slots – Four holes to put the padlocks.

Color – Red

Weight – 250 gms

Hole Dia – 9 mm

Size - 18"

KRM Adjustable Lockout Bag used for the plug, connector, hoist control button, lever, cylinder, pneumatic etc which is basically a hollow tube, PVC can be inserted and can make a tight lockout.

Material – Stainless Steel strip and fine fabric bag.

Slots – Four holes to put the padlocks.

Color – Red

Weight – 250 gms

Hole Dia – 9 mm

Size- 25"

KRM Mini Plug Chord construct in two parts that Completely encloses electrical plugs of mini size to prevent accidental reconnection.

Material – ABS with printed label

Locking slots – Three hole to place the Lock

Size – length 90 mm, width 50mm, diameter 25 mm excluding hinge and locking arrangement

Diameter for Power chord that is different for both side - One side 14 mm, Another side 19 mm

Color – Yellow , Red Or any color make as per required quantity

Weight – 50 gm

KRM Large Plug Lockout isolates potentially hazardous energy without costly tool modifications or inconvenient in-line valves.

Material - Poly Propylene.

Holes for Chord - One hole of 25 mm diameter on both sides.

Locking Slots - 4 holes to latch with lock for group isolation.

Complete Outer Size - Length - 194 mm and width 64 mm.

Inner Size - Length 184 mm and width - 60 mm.

Color - Red or can make any color as per volume required.

Weight - 260 gms

For providing protection to different energy sources for group isolation when multiple authorized employees need to lockout the same energy source at a time to meet Osha's Lockout / Tagout Standard.KRM Input Power Cable Supply Lockout.

Material - Nylon, Elastomeric and Bolt.

Model - The Elastomeric nose that strongly grips to the inner part of the connector hosting.

Advantage - No screw driver need to lock this device.

Use - Can use with IEC60320 type input connect power fitted equipment.

Suitable - For a device having removable power chord for computer, multi-laboratory instruments, power supplies devices etc.

Holes for chord - 9 mm hole dia.

Color - Red & Black.

Weight - 100 gms

Material – Made of Polypropylene.

Lockout is connected to the outer wall (circular) of the male plug, it holds the outer wall so obstructs the plug to be inserted in the socket. Simple design and easy to use at workplace for lockout.

Size – Length of overall device (hole at end) – 54 mm, Length of top end – 40 mm,Width – 37mm and Thickness – 25 mm.

Covers wide usage as applicable to many kinds of industrial waterproof plugs. Can make customized LOGO depending on the quantity required.

Weight – 12 gms

Color – Yellow or as per quantity required.

Material – Made of Polypropylene.
Lockout is inserted into the FEMALE SOCKET, bring over the socket flap to hold it and lockout with suitable padlock and hasp.
Simple design and easy to use at workplace for lockout.
Applicable to all kinds of large, middle and mini size industrial sockets.
Can make customized LOGO depending on the quantity required.
Weight – 12 gms
Color – Red or as per quantity required.

Material – Made of Polypropylene.
Lockout is inserted into the FEMALE SOCKET, bring over the socket flap to hold it and lockout with suitable padlock and hasp.
Simple design and easy to use at workplace for lockout.
Applicable to all kinds of large, middle and mini size industrial sockets.
Can make customized LOGO depending on the quantity required.
Weight – 12 gms
Color – Red or as per quantity required.