Electrical Panel Lockout Boxes

• Material – Strong Polycarbonate body
• Multipurpose  Electrical Panel Lockout is used for air Circuit Breaker or push button which is made by two section . To install the device primarily is switched off from the Source then fix and lock it by the help of safety padlocks.
• Available with or without metallic chain of 100 mm Length to Provide better locking
• For locking arrangement one hole of 9 mm is provide.
• Lower part outer size – 82.mm x 82.5 mm
• Lower part internal cutout dia – 40.5mm
• Upper part outer size  - 65mm
• Upper part outer dia – 57mm
• No of Hole – 2 Holes for Lockout
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electrical Panel Lockout is used to lock nearly all electrical panels and covers that are installed with exposed screws threaded into the panel back-box, preventing the panel so that by mistake no one operates the panel.

• Material – Poly carbonate. For locking purpose one Padlock eye-molded polycarbonate. Can be used  with lockout hasp.
• Provision of 4 small molded holes on back side of border of box to hang on any surface.
• Can put double side tape on back border to stick on any electrical panel surface.
• Dimension Upper Part – Height – 120mm x Width – 190mm x Depth – 25mm
• Dimension Inner Part – Height – 115mm x Width – 185mm x Depth – 22mm
• It can carry on any isolation area, indoor and outdoor application suitable in moisture and even in corrosion area.
• Color – Transparent

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electrical Panel Lockout is used to lock nearly all electrical panels and covers that are installed with exposed screws threaded into the panel back-box, preventing the panel so that by mistake no one operates the panel.
• Material – ABS  material. For locking purpose one Padlock eye-molded ABS. Can be used with lockout hasp.
• Provision of 4 small molded holes on back side of border of box to hang on any surface.
• Can put double side tape on back border to stick on any electrical panel surface.
• Dimension Upper Part– Height – 120mm x Width – 190mm x Depth – 25mm
• Dimension Inner Part – Height – 115mm x Width – 185mm x Depth – 22mm
• It can carry on any isolation area, indoor and outdoor application suitable in moisture and even in corrosion area.
• Color – Grey, Yellow, White or can make as per requirement on the basis of quantities required.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electrical Panel Lockout is used to lock nearly all electrical panels and covers that are installed with exposed screws threaded into the panel back-box, preventing the panel so that by mistake no one operates the panel.
• Material – ABS  material. For locking purpose one Padlock eye-molded ABS. Can be used with lockout hasp.
• Provision of 4 small molded holes on back side of border of box to hang on any surface.
• Can put double side tape on back border to stick on any electrical panel surface.
• Dimension Upper Part – Height – 120mm x Width – 190mm x Depth – 25mm
• Dimension Inner Part – Height – 115mm x Width – 185mm x Depth – 22mm
• It can carry on any isolation area, indoor and outdoor application suitable in moisture and even in corrosion area.
• Color – Grey, Yellow, White or can make as per requirement on the basis of quantities required.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material – Strong Polycarbonate body. Large Electric Panel Lockout device is combination of two parts- lower part square shape with provision of 4holes & super strong adhesive tape, upper parts in round shape.
• Two holes are provided for group locking purpose.
• Outer square base - 95 mm X 95 mm with inner round diameter 78 mm.
• Upper Round Size - Internal diameter 80 mm and depth 65 mm.
• Color – Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Emergency switch or push button lockout device is used to protect the emergency push button to prevent uncertain condition caused by human error which is totally safe from any energy source.
• Material – Strong Polycarbonate body.
• This device is suitable for almost all the square lock switches and can be installed by pressing and fixing with screw.
• Two holes are provided and provision of hole in the base part is also available.
• Outer square base – 66 mm X 66 mm.
• Inner Square Base – 45 mm x 45 mm.
• Upper Part of  Internal Size – 53 mm x 53 mm.
• Depth – 60 mm.
• Weight – 60 gm
• Color – Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material – Strong Polycarbonate body. Large Electric Panel Lockout device is combination of two parts- lower part square shape with provision of 4holes & super strong adhesive tape, upper parts in round shape.
• Two holes are provided for group locking purpose.
• Outer square base – 95 mm X 95 mm with inner round diameter 78 mm.
• Upper Round Size– Internal diameter 80 mm and depth 65 mm.
• Color – Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electric Panel lockout device is used to protect the emergency stop button to prevent uncertain condition caused by human error which is totally safe from ? any energy source.
• Material – Strong Polycarbonate body. Large Electric Panel Lockout device is combination of two parts- lower part square shape with provision of 4holes & super strong adhesive tape, upper parts in round shape.
• Two holes are provided for group locking purpose.
• Outer square base – 95 mm X 95 mm with inner round diameter 78 mm.
• Upper Round Size – Internal diameter 80 mm and depth 65 mm.
• Color – Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electric Panel Lockout is used to lock nearly all electric panels and covers that installed with exposed screws threaded into the panel back-box. Preventing the panel so that by mistake no one operates the panel. 
• Material – Poly Carbonate Body.
• Electrical panel lockout is having  plain surface facilitated with hole at base and having provisions of cuts on five sides due to which it can also be accommodated on lever, handle, etc..
• Available with provision of cuts on five sides due to which it can also be accommodated on lever, handle etc.
• Available with the provision of cutting of 45 and 90 degree angles.
• Size of Double large inner base - 82mm x 80mm.
• Outer Size - 104mm x 104mm x 95mm.
• Weight - 170 gms
• Color - Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electric Panel Lockout is used to lock nearly all electric panels and covers that installed with exposed screws threaded into the panel back-box. Preventing the panel so that by mistake no one operates the panel.
• Material – Poly Carbonate Body.
• Electrical panel lockout is having  plain surface facilitated with hole at base and having provisions of cuts on five sides due to which it can also be accomodated on lever, handle, etc..
• Available with provision of cuts on five sides due to which it can also be accomodated on lever, handle etc.
• Available with the provision of cutting of 45 and 90 degree angles.
• Size of Double large inner base- 82mm x 80mm.
• Outer Size - 104mm x 104mm x 95mm.
• Color - Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electric Panel Lockout is used to lock nearly all electric panels and covers that installed with exposed screws threaded into the panel back-box. Preventing the panel so that by mistake no one operates the panel.
• Material– Poly Carbonate Body.
• Electrical panel lockout is having  plain surface facilitated with hole at base and having provisions of cuts on five sides due to which it can also be accomodated on lever, handle, etc..
• Available with provision of cuts on five sides due to which it can also be accomodated on lever, handle etc.
• Available with the provision of cutting of 45 and 90 degree angles.
• Size of Double large inner base - 82mm x 80mm.
• Outer Size - 104mm x 104mm x 95mm.
• Color - Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Mild Stainless Steel with Powder coating and transparent acrylic sheet.
• Electrical panel Lockout - Multi device is available with locking  arrangement to prevent the accidents arises due to hazardous situation, it can also be made in any other customize size as per the requirement.
• Outer Size - 90 mm x 90 mm x 40 mm.
• Inner Size - 70 mm x 70 mm.
• Accessible by strong double sided tape for fixing it intensely having one latch for locking.
• Color - Grey, Yellow, Red or as per the quantity required.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Strong Poly Carbonate Body. Multipurpose Electrical panel Lockout is used for Air Circuit Breaker or Push Button which is made by two parts. To install the device primarily switched off the energy source then fix and lock it by the help of safety padlocks. Available with or without metallic chain of 100 mm length to provide better locking. For Locking arrangement one hole of 9 mm is provided.
• Size of lower outer base - 35 mm x 35 mm.
• Size of inner hollow base - 27.5 mm x 27.5 mm.
• Size of upper part - 37 mm x 40 mm.
• Furnished to be attached in specified hole of lockable device with specific size in inch is given below:
• Outer Base - 35X35mm Inner Base - 27.5x27.5mm Upper Interior - 35x40mm.
• Color - Transparent Glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Strong Poly Carbonate Body. Multipurpose Electrical panel Lockout is used for Air Circuit Breaker or Push Button which is made by two parts. To install the device primarily switched off the energy source then fix and lock it by the help of safety padlocks. Available with or without metallic chain of 100 mm length to provide better locking. For Locking arrangement one hole of 9 mm is provided.
• Size of lower outer base - 35mm x 35mm.
• Size of inner hollow base - 27.5mm x 27.5mm.
• Size of upper part - 37mm x 40mm.
• Furnished to be attached in specified hole of lockable device with specific size in inch is given below:
• Outer Base - 35X35mm Inner Base - 27.5x27.5mm Upper Interior - 35x40mm.
• Color - Transparent Glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material – Mild stainless steel CR with powder coating and a transparent acrylic sheet.
• Electrical panel Lockout - Multidevice is available with locking  arrangement to prevent the accidents arises due to hazardous situation, it can also be made in any other customize size as per the necessity.
• Complete Outer Base Size – 130x130x75mm
• Inner  Cut Out Bottom  size – 100x100mm
• Also available in different dimensions, color and printed or warning on it supplied as per demand.
• Accessible by strong double sided tape for fixing it intensely having one latch for locking.
• Weight - 600gms
• Color -  standard Yellow.  Other color Grey, Red  can make   on volume  basis quantity

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com