Electrical Panel Lockout Boxes

• Material - Made from ABS  and mild steel plate.
• Size of Yellow part : 53x51 mm with provision of hole.
• Size of Metal part : 31 mm x  (40mm + 37mm at end of part) mm , but  cantilever part  from yellow base : 31mm x 40 + 37  at end of part ) mm
• Yellow Base Part can be fixed by  double sided tape or screw.
• Different shape lockouts can be customized on quantity basis.
• Cover drawer with switch handle, change over switch lockout device as shown in image to prevent accident.
• Always use Lockout Tagout while shutdown and maintenance work.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com,krm@krmcorporation.com

• Material - Made from ABS  and mild steel plate.
• Size of Yellow part : 53x51 mm with provision of hole.
• Size of Metal part : 81 mm x  (40mm + 30mm at end of part) mm , but cantilever from yellow base , internal tapper cut shape size -25 mm top x 33mm bottom part 
• Yellow Base Part can be fixed by  double sided tape or screw.
• Different shape lockouts can be customized on quantity basis.
• Covers knob switch and change over switch to put lockout device as shown in image to prevent accident handle, lever in the hole.
• Always use Lockout Tagout while shutdown and maintenance work.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com,krm@krmcorporation.com

• Material - Made from ABS  and mild steel plate.
• Size of Yellow part : 53x51 mm with provision of hole.
• Size of Metal part : 98 mm , but cutout cantilever part from yellow base : width 52mm x height 60mm ,and cutout center/ top average width  25/21 mm
• Yellow Base Part can be fixed by double sided tape or screw.
• Different shape lockouts can be customized on quantity basis.
• Insert lockout device as shown in image to prevent accident handle, lever in the hole.
• Always use Lockout Tagout while shutdown and maintenance work.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com,krm@krmcorporation.com

• Made of ABS material. Magnetic base.
• Can be fixed on any plain metallic surface.
• On Requirement text can be customized on quantity basis.
• Weight 10gms each.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

Made of ABS material. Magnetic base. Can be fixed on any plain metallic surface. On Requirement text can be customized on quantity basis. Weight 10gms each.

• Material - ABS base with steel or Flexible Plastic strip. Electrical Handle Lockout for electrical panel is made of four parts which is used to block the movement of handles and lever installed at electric panel, is available with or without lock.
• Locking Slot - Two holes or strong adhesive at base part so that it can be stick solidly within some hour and also can be screwed for tight sticking on oily surface and then locked by the padlock.
• Size of Base - Diameter is 59 mm, thickness 10 mm and size of SLOTTER part is 25 mm x 18 mm x 7 mm. Steel / Plastic grip with edge to edge length is 435 mm, width 19 mm, with multiple holes of 9 mm for group isolation purpose.
• Weight - 40 gms for steel strip without brass padlock, 30 gms of plastic strip without brass padlock.
• Color - Yellow, Red Base with metal or plastic strip.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - ABS base with steel or Flexible Plastic strip. Electrical Handle Lockout for electrical panel is made of four parts which is used to block the movement of handles and lever installed at electric panel, is available with or without lock.
• Locking Slot - Two holes or strong adhesive at base part so that it can be stick solidly within some hour and also can be screwed for tight sticking on oily surface and then locked by the padlock.
• Size of Base - Diameter is 59 mm, thickness 10 mm and size of SLOTTER part is 25 mm x 18 mm x 7 mm. Steel / Plastic grip with edge to edge length is 435 mm, width 19 mm, with multiple holes of 9 mm for group isolation purpose.
• Weight - 40 gms for steel strip without brass padlock, 30 gms of plastic strip without brass padlock.
• Color - Yellow, Red Base with metal or plastic strip.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material- ABS
• Magnetic base.
• Can be fixed on any plain metallic surface.
• On Requirement text can be customized on quantity basis.
• Weight -10gms each

• Made of ABS material. Magnetic base. Can be fixed on any plain metallic surface. On Requirement text can be customized on quantity basis.
• Weight 10gms each.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electric Panel Lockout is used to lock nearly all electric panels and covers that installed with exposed screws threaded into the panel back-box.
• Preventing the panel so that by mistake no one operates the panel. Different shapes are available for different sizes.
• Material - ABS base with steel or strong polypropylene strip.
• Electrical Handle Lockout for electrical panel is made of four parts which is used to block the movement of handles and lever installed at electric panel, is available with or without lock.
• Locking Slot - Two holes or strong adhesive at base part so that it can be sticked solidly within some hour and also can be screwed for tight sticking on oily surface and then locked by the padlock.
• Size of Base - Diameter is 59 mm, thickness 10 mm and size of SLOTTER part is 25 mm x 18 mm x 7 mm.
• Steel / Plastic grip with edge to edge length is 435 mm, width 19 mm, with multiple holes of 9 mm for group isolation purpose.
• Weight - 40 gm for steel strip with 100 gm of padlock
• Color - Yellow Base with metal or plastic strip.
• NOTE:- Base Plate or panel is available in both option either can go with yellow or red 
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - ABS base with steel or strong polypropylene strip.
• Electrical Handle Lockout for electrical panel is made of four parts which is used to block the movement of handles and lever installed at electric panel, is available with or without lock.
• Locking Slot - Two holes or strong adhesive at base part so that it can be sticked solidly within some hour and also can be screwed for tight sticking on oily surface and then locked by the padlock.
• Size of Base - Diameter is 59 mm, thickness 10 mm and size of slotter part is 25 mm x 18 mm x 7 mm.
• Steel / Plastic grip with edge to edge length is 435 mm, width 19 mm, with multiple holes of 9 mm for group isolation purpose.
• Weight - 40 gm for steel strip with 100 gm of padlock.
• Color - Yellow Base with metal or plastic strip.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - ABS base with steel or strong polypropylene strip. Electrical Handle Lockout for electrical panel is made of four parts which is used to block the movement of handles and lever installed at electric panel, is available with or without lock.
• Locking Slot - Two holes or strong adhesive at base part so that it can be sticked solidly within some hour and also can be screwed for tight sticking on oily surface and then locked by the padlock.
• Size of Base - Daimeter is 59 mm, thickness 10 mm and size of SLOTTER part is 25 mm x 18 mm x 7 mm. Steel/Plastic grip with edge to edge length is 435 mm, width 19 mm, with multiple holes of 9 mm for group isolation purpose.
• Color - Yellow Base with metal or plastic strip.
• Weight - 30 gm for plastic strip and 100 gm padlock .

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electrical Panel lockout device is used to protect the emergency stop button to prevent uncertain condition caused by human error.
• Material - Strong polycarbonate body.
• Electrical panel lockout multiple devices is suitable for almost all the square lock switches which can be install by pressing and fixing with screw.
• Two holes for locking is provided and provision of hole in base part is also available.
• Outer square base – 66 x 66 mm
• Inner base size – 45 x 45 mm
• Upper part of Internal Size – 53 x 53 mm
• Depth – 30 mm
• Color – Transparent glass.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Electrical Panel Lockout Device is used to protect the product switch / equipment to prevent uncertain condition caused by human error which is totally safe from any energy source.
• Material – Made from high strength transparent glass resin PC & ABS.
• Emergency switch or push button lockout device multi device is suitable for almost all the square lock switches.
• It can be installed by pressing and fixing tape / screw as per site requirement.
• Lower Part Square Internal Cutout Size – 74x74mm
• Lower Part Square Outer Size – 100x100mm
• Overall Height – 75mm
• Color – Shade transparent glass.
• Hole Dia – 7.8mm
• No. of Holes – 3
• Weight – 120gms
• Note: This product has volumetric weight due to size and shape, So that 10Pcs of product weight is calculated as per 4.5kg (volumetric size: 36*24*24)

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com,krm@krmcorporation.com

• Emergency switch or push button lockout device is used to protect the emergency push button to prevent uncertain condition caused by human error which is totally safe from any energy source.
• Material – Made from high strength transparent glass resin PC.
• Emergency Push Button Lockout device multi device is suitable for almost all the square lock switches and can be installed by pressing and fixing with screw.
• Two holes are provided and provision of hole in the base part is also available.
•  Size – Length – 50 mm, Width – 47.3 mm, Height – 50 mm
• Internal Hole Diameter – 22 or 30 mm
• Color – Transparent glass.