Valve Lockout

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue.
• Resistant to low and high temperature variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Extension - 88 mm x 127 mm.
• Ball valve lockout device designed to lock pipes 0.374 up to 1.24" in outer diameter
• Color - Standard color Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM ULD is designed to lockout almost all type of valves for variable sizes and dimensions
• (Square/round/flat plain) and different lengths. Valves can also be locked in any position for non lockout uses.
• KRM LOTO universal lockout with two blocking arm.
• Material - ABS/PP + Metal Steel parts + Spring.
• Lower Bottom Jaw Grip - 15 mm.
• Use - locking of gate valves / wheels / ball valve.
• Locking - 4 holes for group locking.
• Total Height - 152 mm. SHORT ARM SIZE (KRM-K-SA) x 2 No
• Length of Metal steel rod - 160 mm.
• Thickness of Metal steel rod - 7.5 to 8mm.
• Horizontal - 155 mm.
• Color - Red or any color as per requirement

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in  place by using catalogue. Resistant to low and high temperature   variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being  turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION label.
• Model - Standard small  with even or six holes for locking on both parts will match for group locking.
• For use on ball valve sizes from 2" to 8", Large lockout locks out pipes 2" to 8" in diameter, Outside pipe diameter 2" - 8"
• Color - Standard color Red or can make any color as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue.
• Resistant to low and high temperature variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Extension - 88 mm x 127 mm.
• Ball valve lockout device designed to lock pipes 0.374 up to 1.24" in outer diameter
• Color - Standard color Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue.
• Resistant to low and high temperature variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Extension - 88 mm x 127 mm.
• Ball valve lockout device designed to lock pipes 0.374 up to 1.24" in outer diameter
• Color - Standard color Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue.
• Resistant to low and high temperature variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION  label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Ball valve lockout device designed to lock pipes 0.5" up to 2.5" in outer diameter
• Color - Standard color Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Ball valve lockout's body in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalogue.
• Resistant to low and high temperature variation 45o Celsius to 200o Celsius.
• It is very indestructible finger friendly valve covers whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve from handle being turned.
• Material - Poly Propylene - UV color with identifiable DANGER or CAUTION  label.
• Model - Standard small with seven or six holes for locking on both parts will match for group locking.
• Ball valve lockout device designed to lock pipes 0.5" up to 2.5" in outer diameter
• Color - Standard color Red or any color make as per volume.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Mild Stainless Steel.
• KRM LOTO Metal Ball valve lockout easy to use, single piece design makes our standard ball valve lockout the perfect tool for securing your valve handles in the off position. Hole diameter 9/32" padlock shackles.
• For use of KRM-K-MBVS from 1/4" to 1".
• Temperature Range - 40 degree to 248 degree.
• No of Holes - 6.
• Color - Standard color Red or any color as per required quantity.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Material - Mild Stainless Steel.
• KRM LOTO Metal Ball valve lockout easy to use, single piece design makes our standard ball valve lockout the perfect tool for securing your valve handles in the off position. Hole diameter 9/32" padlock shackles.
• For use of KRM-K-MBVL from 1.25" to 3" (9/32" lock holes).
• For use of KRM-K-MBVS from 1/4" to 1".
• Temperature Range - 40 degree to 248 degree.
• No of Holes - 8
• Color - Standard color Red or any color as per required quantity.
• Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Top Rail Ball valve lockout is a simple and a quick way to prevent ball valve that is used in open condition on pipes - 12 to 37 mm in diameter.
• Material - Poly Propylene - UV Color.
• Model - Mini Top Rail and Large Top Rail.
• Mini Top Rail model suitable for application 12 mm to 62.5 mm (0.472” to 2.461”) diameter pipe.
• Color - Standard color Red or any color as per the required quantity.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM LOTO Top Rail Ball valve lockout is a simple and a quick way to prevent ball valve that is used in open condition on pipes - 12 to 37 mm in diameter.
• Material - Poly Propylene - UV Color.
• Model - Mini Top Rail and Large Top Rail.
• Mini Top Rail model suitable for application 12 mm to 62.5 mm (0.472” to 2.461”) diameter pipe.
• Large Top Rail model suitable for application 50 mm to 200 mm (2” to 7.8”) diameter pipe.
• Color - Standard color Red or any color as per the required quantity.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• Butterfly valve lockout is used to lock hydraulic, pneumatic and chemical energies efficiently. Made of dielectric material and doesn’t effected by any chemical, low in cost with high performance.
• Material – Poly Propylene-UV Color with identifiable DANGER label.
• KRM LOTO Ball Valve Lockout’s body is in two parts, The butterfly  
• valve lockout is a simple, effective way to secure your butterfly
• valves to prevent unauthorized operation working with low and  
• High temperature variation – 45°C to 200°C.
• Model – Standard Small with six holes for Locking on both parts will
• match for Group locking
• Suitable for valve handle from 8mm to 45mm (0.3”-1.8”)
• Outer edge to edge Length – 295 mm (11.61”)
• Color – Standard color Red Or any color make as per the required quantity.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM ULD is designed to lockout almost all type of valves for variable sizes and dimensions
• (Square/round/flat plain) and different lengths. Valves can also be locked in any position for non lockout uses.
• KRM LOTO universal lockout with two blocking arm.
• Material - ABS/PP +  Metal Steel parts + Spring.
• Lower Bottom Jaw Grip - 15 mm.
• Use - locking of gate valves / wheels / ball valve.
• Locking - 4 holes for group locking.
• Total Height - 152 mm. LONG ARM SIZE (KRM-K-LA) x 2 No
• Length of Metal steel rod - 200 mm.
• Thickness of Metal steel rod - 7.5 to 8mm.
• Horizontal - 215 mm.
• Color - Red or any color as per requirement.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM ULD is designed to lockout almost all type of valves for variable sizes and dimensions (Square/round/flat plain) and different lengths. Valves can also be locked in any position for non lockout uses.
• KRM LOTO universal lockout with two blocking arm.
• Material - ABS/PP +  Metal Steel parts + Spring.
• Lower Bottom Jaw Grip - 15 mm.
• Use - locking of gate valves / wheels / ball valve.
• Locking - 4 holes for group locking.
• Total Height - 152 mm. SHORT ARM SIZE (KRM-K-SA)
• Length of Metal steel rod - 160mm.
• Thickness of Metal steel rod - 7.5 to 8mm.
• Horizontal - 155 mm.
• Color - Red or any color as per requirement.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com

• KRM ULD is designed to lockout almost all type of valves for variable sizes and dimensions (Square/round/flat plain) and different lengths. Valves can also be locked in any position for non lockout uses.
• KRM LOTO universal lockout with one blocking arm.
• Material - ABS/PP + Metal Steel parts + Spring.
• Lower Bottom Jaw Grip - 15 mm.
• Use - locking of gate valves / wheels / ball valve.
• Locking - 4 holes for group locking.
• Total Height - 152 mm. LONG ARM SIZE (KRM-K-LA)
• Length of Metal steel rod - 200 mm.
• Thickness of Metal steel rod - 7.5 to 8mm.
• Horizontal - 215 mm.
• Color - Red or any color as per requirement.

Note - Price of the product involves the basic cost of the product, whenever placing an order custom duty and other charges in particular receiving country of the buyer, would be payed by the buyer always.

For Bulk Orders

Contact: +91 9810 291 381

E-mail: info@krmcorporation.com, krm@krmcorporation.com